Mira Opero Dual Thermostatic Shower Mixer

Mira Opero 1.1944.003 Details

For functional modern styling and premium features within your shower enclosure, choose this Mira Opero Dual Thermostatic Shower Set. Its versatile appearance and minimalist design make it the perfect complement for todays contemporary bathroom. This dual thermostatic shower mixer valve is incorporated with internal and external features that help set the shower at its optimal best for a thrilling experience. WRAS, KIWA, CE and TMV2 Approved, it is backed by a five-year guarantee from the manufacturer against manufacturing defects.

Choice of Finishes available - Chrome, Matt Black, and Brushed Nickel [Optional].
Overall Size [mm]: 546mm x 1170mm [Depth x Height].
Size [mm]: 170mm x 95mm x 170mm [Width x Depth x Height].
Fixing centres: 940mm (94cm).
A clever warm-up indicator will pulse as your shower comes up to your pre-set temperature.
Separate flow and temperature controls using button actuation.
Choose your outlet - intuitive push-button technology allows you to select the handset, overhead or both.
Switched-on design - no electricity, batteries, or extra wiring needed.
An ultra-sleek, flush valve design makes for a minimal.
Built-in look – without any complicated in-the-wall installation.
Perfect shower at your fingertips - Super simple temperature dial and easy-to-use push buttons.
250mm (25cm) Deluge Shower Head.
110mm (11cm) Four spray shower handsets Included.
Supplied with 1250mm (125cm) flexible shower hose.
Swinging shower head riser - Position the deluge Showerhead anywhere.
Works on all systems, even at low-pressure.
Temperature control type: Thermostatic.
Thermostatic temperature stability with max temperature stop for increased safety.
Automatic shutdown: Shutdown within 2 secs.
Factory set to safe max temp.
Adjustable maximum temperature for on-site conditions.

Flow actuation: Push-button.
Water entry points: Rear only.
Inlet connections: Direct 15mm (1.5cm) push-fit connections.
Outlet connections: 1/2" BSP Male.
Reversed inlets supported: No = hot left, cold right only.
Cold water range: 1°C to 25°C.
Hot water range: Min 55°C; 60°C - 65°C (recommended).
Minimum maintained pressure (gas water heater) 1 bar (10-meter head).
Minimum maintained pressure (gravity system): 0.1 bar (1-meter head).
Maximum maintained pressure: 5.0 bar (50-meter head).
Maximum static pressure: 10.0 bar (100-meter head).
Flow rate (at handset): 8.6 l/min at 0.5bar.
Flow regulator: 9 l/min (supplied with a product - x2).
Temperature stability: +/- 2°C.
Pipe centres 50mm (5cm) apart.
The pipe spacer guide included aiding pipework installation during the first fix.
The front of the tile installation system allows connection to pipework during.
Second phase fix after tiling is complete.
Multi-use tool supplied to help with installation.
Installation and user guide PDF available in the technical tab.
Refer to the technical drawing for more technical specifications.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5 Years
⤷ Inlet Centres
: 1/2inch BSP
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Hose Included
: Yes
⤷ Hose Length
: 1250
⤷ Flow Rates (l/min)
: 8.6 l/min at 0.5bar
⤷ Configuration
: Shower Set
⤷ Temperature Control
: Thermostatic
⤷ Anti-Scald
: Yes
⤷ Compliance/Approvals/Standard
: WRAS | KIWA | CE | TMV2
⤷ Product Type
: Thermostatic Shower

⤷ Plumbing System Compatibility
: All
⤷ Showerhead Type
: Swivel
⤷ Showerhead Finish
: Chrome
⤷ Riser Rail & Kit Finish
: Chrome
⤷ Water Entry Points
: Rear Only
⤷ Auto shutdown if hot or cold supplies fail
: Yes
⤷ Handset Included
: Yes
⤷ Spray Patterns (Shower Handset)
: 4
⤷ Shower Head Included
: Yes
⤷ Shower Head Size
: 250
⤷ Rail Length
: 1170

Additional Info & Downloads

Download the Installation Instructions Pdf File

Total: £400.50 2-3 Working Days Approx QS Supplies

6 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

CE Certified Product

CE mark meets the prescribed safety, health and environmental protection requirements and all appropriate EU requirements. This mark is mandatory for products designed, made and sold in the European Economic Area.

KIWA Approved

KIWA is a universally accepted Dutch approval standard at par with German DVGW, Austrian OVGW, Swiss SVGW, and French NF approval systems. The KIWA approval means that the products meet a high-quality standard for portable water and gas-related products.