Bristan Cinnamon Easyfit Sink Brushed Nickel Mixer Tap

Cinnamon CNN EFSNK BN Details

Turn your bathroom into a more functional and beautiful place with the simple addition of the Bristan Cinnamon Easyfit Sink Mixer Tap. The tap has a modern shape that can be fixed with an Easy Fit base and metal fixing nut, which comes included with the tap. The tap features a beautiful Brushed Nickel finish surface that ensures that the surface of the tap is resistant to stains, and it is easy to wipe down and clean to keep it looking its best for as long as possible. The product needs minimum 0.3 bar water pressure for smooth working and internally includes a long-life ceramic cartridge for added durability and ease of use. It comes with a 10-year guarantee from the manufacturer.

The manufacturing code of this product is CNN EFSNK BN.
It comes in a Brushed Nickel finish.
Long-life ceramic cartridge for added durability and ease of use.
Requires a minimum of 0.3 bar water pressure.

Height: 170mm - (17cm).
Spout Reach: 225mm - (22.5cm).
Base to spout: 148mm - (14.8cm).
Refer to the technical diagram for the complete technical dimensions.

Info / Size (mm)

Taps
Pipe Center: 225 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Lifting/Tilting
⤷ Range
: Cinnamon
⤷ Tap Body Shape
: Round
⤷ Handle Position
: Upwards
⤷ Colour
: Brushed Nickel
⤷ Warranty/Guarantee
: 10-Years
⤷ Theme
: Modern
⤷ Installation Type
: Deck-Mounted
⤷ No. of Holes Required
: 1
⤷ Base To Spout
: 148

⤷ Spout Reach
: 225
⤷ Overall Height
: 170
⤷ Inlet Connections
: 1/2 Inch BSP
⤷ Minimum Operating Pressure (Bar)
: 0.3
⤷ Handle Style
: Lever
⤷ WRAS Approved
: Yes
⤷ Barcode
: 5014868065182
⤷ Product Type
: Sink Mixer Tap
⤷ Tails
: Flexible Tails

Total: £80.09 2 Working Days Approx QS Supplies

2 Features Included In This Product Explained

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...