Bristan Sentinel Chrome Kitchen Sink Mixer Tap With Easyfit Base

Bristan Sentinel ST SNK EF C Details

Transform your kitchen into a majestic aqua lounge by bringing home this strikingly elegant Kitchen Sink Mixer Tap from the contemporary Sentinel series of Bristan. The attractive chrome finish will impart a designer appeal. You can also buy this unit in a brushed nickel finish. It is produced from top quality brass for pleasing you with years of impeccable service and is suitable for a low water pressure system. The manufacturer backs this unit with a 10 year guarantee against any manufacturing defects.

Deck mounted installation.
Size [mm]: 160mm x 375mm x 245mm (Width x Height x Depth).
Size [cm]: 16cm x 37.5cm x 24.5cm (Width x Height x Depth).
Base to spout: 240mm - (24cm).
Centre of the inlet to centre of outlet: 210mm - (21cm).
Handle type: lever.
Flow type: dual.
Handle material: metal.
Number of tap holes required: 1.
Connection inlet: 1/2 inch BSP female flexible tails.
Connection outlet: anti-splash.

Valve cartridge type: 1/2 inch ceramic disc valve.
Suitable for all plumbing systems.
Minimum dynamic pressure: 0.3 bar.
Maximum dynamic pressure: 5.0 bar.
Maximum hot water temperature: 65°C.
Maximum static pressure: 10 bar.
Long life and easy to use 1/4 turn ceramic disc valves.
Metal fixing nut for added durability.
Download the Installation Instruction PDF File From The Additional Info Section.
Refer to the technical diagram for complete technical dimensions.

Info / Size (mm)

Tap
Pipe Centre: 190 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Lifting/Tilting
⤷ Handle Position
: Left & Right
⤷ Tap Body Shape
: Round
⤷ Range
: Sentinel
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 10 Years
⤷ Material
: Brass
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1
⤷ Valve/Cartridge Type
: 1/2 Inch Ceramic Disc Valve
⤷ Handle Material
: Metal

⤷ Base To Spout
: 240
⤷ Spout Reach
: 210
⤷ Overall Height
: 375
⤷ Width
: 160
⤷ Minimum Operating Pressure (Bar)
: 0.4
⤷ Flow Rates (l/min)
: 13.2 (l/min) at 0.4 bar
⤷ Handle Style
: Stick
⤷ WRAS Approved
: Yes
⤷ Barcode
: 5014868039527
⤷ Product Type
: Sink Mixer Tap
⤷ Tails
: Flexible Tails

Additional Info & Downloads

Download the Installation Instruction Pdf File

Total: £181.00 2 Working Days Approx QS Supplies

5 Features Included In This Product Explained

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.

Luminance Chrome

It is a hard-wearing chrome plating which is salt-tested and scratch-proof for durable, long-lasting use.

Precise Glide

It comes incorporated with ceramic cartridges for long life with precise control for smooth, leak-free use.

Quick Change

The product can be simply removed and another one fixed in its place. All you need to do is turn off the water supply.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...