Bristan Kingsbury Kitchen Sink Mixer Tap With EasyFit Base

Technical drawing QS-V7537 / KG SNK EF C

Additional image of Bristan Kingsbury Kitchen Sink Mixer Tap With EasyFit Base

Bristan Kingsbury Kitchen Sink Mixer Tap With EasyFit Base

Finishes Available : Chrome / Gold

QS-V7537

MFC CODE: KG SNK EF C

£85.00

RRP: ~~£145.00~~ You Save £60.00 on RRP

No Rating

Review this Product

STOCK AVAILABILITY

2 Working Days Approx

Shipping: £5.95

Variations

Technical

Finishes Available

OP-145594 - Chrome

+ Read what's included.. & options available

Please Note all the measurements are in 'mm'

Colour	Chrome
Warranty/Guarantee	5 years
Material	Brass
Theme	Traditional
Installation Type	Deck mounted
Valve Type	Compression valves
Handle Material	Metal
Base To Spout	200
Spout Reach	195
Overall Height	300
Minimum Operating Pressure (Bar)	0.3
Flow Rates (l/min)	10.9 (l/min) at 0.3 bar
Handle Style	Crosshead

INFO / SIZE (mm)

Tap
Pipe centre: 195 mm

QTY

Bristan Kingsbury KG SNK EF C DETAILS

Make your washing and cleaning chores an absolute breeze by installing this Kitchen Sink Mixer Tap from the swanky Kingsbury range of Bristan. Manufactured to the highest standards from top quality brass, this aqua adornment will deliver flawless performance. The attractive finish will impart a designer appeal to your kitchen. This unit comes in a choice of finishes. It is suitable for low water pressure system and is supplied with easy to use metal lever handle. A 5 year manufacturer guarantee against any manufacturing faults accompanies this unit.

Available in 2 finishes
Tap supplied with EasyFit base
Height : 300mm
Centre of inlet to centre of outlet : 195mm
Traditional stylish design
Constructed using high quality brass
Valve type : compression valves
Suitable for low water pressure system

Required minimum 0.2 bar to maximum 5.0 bar water pressure
Inlet connections : 15mm compression
Suitable for all plumbing systems
Unique patented technology
Supplied with easy to use metal lever handle
Refer technical diagram for complete technical dimension
Download installation instruction PDF from technical tab
5 year of guarantee from the manufacturer against any manufacturing defects.

FEATURES INCLUDED IN THIS PRODUCT EXPLAINED

Step1 Fitting the Base
The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position which is indicated by the word ‘FRONT facing forward. Now tighten the fitting to the surface with a hex key. Lastly, the plain barrel must be replaced.
Step 2 Fitting the Tails
Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves.
Step 3 Fitting the Tap Body
Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.