Flavel Windsor Manual Control Traditional Gas Fire

Flavel Windsor Manual Control Traditional Gas Fire.

• Versatile gas fire with a timeless design.
• Traditional open-fronted design.
• Coal fuel effect.
• Slimline inset gas fire.
• 2.7kW Direct heat output.
• Fireback option: Plain black.
• Type of heat: Radiant.
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue.
• Size [mm]: 475mm x 120mm x 592mm [Width x Depth x Height].
• Size [cm]: 47.5cm x 12cm x 59.2cm [Width x Depth x Height].
• Download the Installation, Maintenance and User instructions PDF from the Additional Info section.
• For complete size details, please refer to technical drawing.

• Builders opening sizes:.
• Minimum height: 550mm (55cm) and Maximum height: 575mm (57.5cm).
• Minimum width: 330mm (33cm) and Maximum width: 440mm (44cm).
• Specification of Manual Control:.
• A simple and discreet control system is located behind the fire's trim or frets on inset fires and the bottom right side on outsets.
• Specification of Brick Chimney - Class 1:.
• Apart from products designed for "no chimney" applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal.
• Specification of Pre-Fabricated Flue - Class 2:.
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire.
• Specification of Pre-Cast flue:.
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858.