Flavel Windsor Contemporary HE Wall Inset Gas Fire

Flavel Windsor FSHCHWMN Details

The Flavel Windsor Contemporary HE Wall Inset Gas Fire is a high-quality, manually-controlled unit that is slimline glass-fronted and offers 2.9kW of direct heat output. Fueled via natural gas and available in either a full-depth coal effect or a pebble fuel effect, this product includes a plain black fire back option and offers direct and convective heat to enjoy as well. Designed with several safety devices included, this product features a flame supervision device and an AirWatch system within its form and is certain to last through years of daily use with ease.

Wall Mounted high gas fire.
Available in full-depth coal or pebble fuel effect [Optional].
Control type: Manual.
Fuel type: Natural gas.
Energy efficiency class: D.
Slimline glass fronted.
2.9kW Direct heat output.
Fire back option: Plain black.
Type of Heat: Radiant and Convected.
It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue.
Size [mm]: 512mm x 125mm x 671mm [Width x Depth x Height].
Size [cm]: 51.2cm x 12.5cm x 67.1cm [Width x Depth x Height].
Download the Installation, Maintenance and User Instructions PDF file from the Additional info section.

For complete size details, please refer to technical drawing.
Builders opening sizes:.
Minimum Height: 550mm (55cm) and Maximum Height: 575mm (57.5cm).
Minimum width: 330mm (33cm) and Maximum Width: 440mm (44cm).
Specification of Manual Control:.
A simple and discreet control system is behind the fire's trim or frets on inset fires and the bottom right side on outsets.
Specification of Brick Chimney - Class 1:.
Apart from products designed for "no chimney" applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal.
Specification of Pre-Fabricated flue - Class 2:.
Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire.
Specification of Pre-Cast flue:.
Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858.

Info / Size (mm)