Hudson Reed Square Twin Shower Valve Chrome

Hudson Reed Square SQRTW01 Details

The Hudson Reed Square Twin Shower Valve is available for purchase with or without diverter. It features remarkably high-quality internal brass construction to ensure it lasts through years of frequent use. Suitable for placement within a low-pressure water system, this model requires 0.1 bar of water pressure to operate smoothly. Boasting an excellent flow rate and WRAS, TMV2, and TMV3 approved; this unit is quarter-turn valve operated and is certain to provide smooth and precise control during every usage.

Available in two variants: without diverter or with diverter [Optional].
Sleek design with stunning chrome finish.
Size [mm]: 80mm x 135mm x 215mm [Width x Depth x Height].
Size [cm]: 8cm x 13.5cm x 21.5cm [Width x Depth x Height].
Suitable for low-pressure water system.

Requires a minimum of 0.1 bar of water pressure to operate smoothly.
Accurate flow control.
Excellent flow rates.
Suitable for use with all systems: gravity-fed pumped unvented high-pressure or fully modulated combi-boilers.
Refer to the technical drawing for more technical specifications.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 20 Year
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 5.5, 0.5 bar - 14, 1 bar - 20, 2 bar - 29, 3 bar - 44
⤷ Handle Style
: Knob
⤷ WRAS Approved
: Yes
⤷ Backplate Width
: 80

⤷ Backplate Height
: 215
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 2
⤷ Plumbing System Compatibility
: Suitable for use with all systems
⤷ Plumbing Option
: Concealed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: Quarter Turn

Total: £174.30 2 Working Days Approx QS Supplies

7 Features Included In This Product Explained

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

Optional: Diverter In Showers

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Hudson Reed Square Twin Shower Valve Chrome

MFC Code: SQRTW01

Hudson Reed Square SQRTW01 Details

Technical Specifications

7 Features Included In This Product Explained

Reviews & Ratings