Geberit Monolith Plus Sanitary Module 505 x 1140mm For Wall-Hung WC

The Geberit Monolith Plus Sanitary Module for Floor-Standing WC is designed with a front cladding created from 8mm thick glass material and side cladding crafted from a sleek and strong brushed aluminium. Complete with soft-touch buttons for both flush actuation as well as odour extraction, this product contains a honeycomb filter within it that can be installed without tools of any kind at all. With an adjustable flow volume, this unit comes with the factory settings that allow for both 6-litre and 3-litres flushes.

• Choice of finishes available White, Lava, Black, Sand Grey, Stoneware Concrete Look and Stoneware Slate Look [Optional].
• Size [mm]: 505mm x 1140mm [Width x Height].
• Size [cm]: 50.5cm x 114cm [Width x Height].
• Finish: white.
• Surface: 8mm (0.8cm) Glass.
• Features Dual flush.
• Compensation of dimensional tolerances possible.
• Height adjustable up to 7cm.
• Front cladding made of glass (ESG).
• Fastening height WC ceramic appliance 35 ± 1cm.
• Side cladding made of aluminium brushed.
• Self-supporting.
• Orientation light can be set in seven colours.
• Day/night detection can be set for orientation light.
• An odour extraction unit with a ceramic honeycomb filter can be installed without tools.
• The ceramic honeycomb filter for odour neutralisation can be replaced without tools.
• The odour extraction unit automatically switches off after a predefined running time.
• Operation with extra-low voltage, no mains voltage in the cistern.
• Mains connection with flexible three-wire sheathed cable.
• Water supply connection on the rear centre.
• Water supply connection on the left/right possible with accessories.
• Water supply connection on the bottom.
• Protection class I.
• Protection degree IPX4.
• Nominal voltage 100-240 V AC.
• Mains frequency 50-60 Hz.
• Operating voltage 4.1 V DC.
• Power consumption 5 W.
• Flow pressure 0.1-10 bar.
• Maximum operating temperature, water 25 degrees celsius.
• Flush volume, factory setting 6 and 3 Litres.
• Flush volume large, adjustment range 4.5 / 6 Litres.
• Flush volume small 3 Litres.

• Calculated flow rate 0.11 l/s.
• Minimum flow pressure for calculated flow rate 0.5 bar.
• Water supply Side connection Set [Optional].
• Vario Fastening Set [Optional].
• Download the Installation Instructions PDF File from the Additional Info Section.
• Application Purposes:.
• For renovations, conversions and new buildings.
• For wall inlets with inlet height > 23cm.
• For replacing low-level exposed cisterns.
• For replacing half-high level exposed cisterns.
• For replacing wall-hung WCs with close-coupled exposed cistern.
• For replacing wall-hung WCs with a pressure-flushing valve.
• For replacing wall-hung WCs with concealed cisterns with a maximum service opening height of < 109cm.
• For Geberit AquaClean WC complete solutions.
• For connecting Geberit AquaClean WC enhancement solutions with accessories.
• For mounting on finished floors.
• For installation in front of dry walls or solid walls.
• For compensating the offset between WC connections and wall drains, using a stepped straight connector for wall-hung WCs.
• Scope Of Delivery:.
• Water supply connection set with two angle stop valves, 1/2".
• Flush bend extension 160mm.
• Sleeve made of EPDM, Ø44 / 55mm.
• Straight connector made of PE-HD, Ø90mm.
• Adaptor socket made of PE-HD, Ø90 / 110mm.
• Two threaded rods M12.
• Sound insulation set.
• Female socket for mains connection.
• Power supply unit.
• Base cover.
• Fastening material for drywall.
• Fastening material.
• Fastening material for installation in front of concealed cisterns.