Geberit Monolith Plus Sanitary Module 505 x 1140mm For Floor-Standing WC

Finishes Available: White / Black / Umber / Sand Glass


MFC CODE: 131.233.SI.5


RRP: £2395.21


3-4 Working Days Approx

Not Yet Rated No Rating

Review this Product

Shipping: £29.95

Select Finishes Available
OP-113240 - White Glass - 131.233.SI.5
+  Read what's included.. & options available
Please Note all the measurements are in 'mm'
Colour White Glass
Country of Origin Germany
Flush Type Dual Flush
Width 505
Height 1140
Water Supply Connections Bottom, Rear centre and Left or Right

Geberit Monolith 131.233.SI.5 DETAILS

The Geberit Monolith Plus Sanitary Module for Floor-Standing WC is designed with a front cladding created from 8mm thick glass material and side cladding crafted from a sleek and strong brushed aluminium. Complete with soft-touch buttons for both flush actuation as well as odour extraction, this product contains a honeycomb filter within it that can be installed without tools of any kind at all. With an adjustable flow volume, this unit comes with the factory settings that allow for both 6-litre and 3-litres flushes.

  • Size: 505x 1140mm [Width x Height]
  • Surface : 8mm Glass
  • Choice of finish available [Optional]
  • Features Dual flush
  • Compensation of dimensional tolerances possible
  • Front cladding made of glass (ESG)
  • Cistern fully insulated against condensation
  • Side cladding made of aluminium brushed
  • Self-supporting
  • Adjustable flush volume
  • Soft-touch buttons for flush actuation and odour extraction
  • Orientation light and odour extraction activated when a user approaches
  • Orientation light can be set in seven colours
  • User detection range can be set
  • Day/night detection can be set for orientation light
  • Odour extraction unit with ceramic honeycomb filter can be installed without tools
  • Ceramic honeycomb filter for odour neutralisation can be replaced without tools
  • Odour extraction unit automatically switches off after a predefined running time
  • Operation with extra-low voltage, no mains voltage in cistern
  • Mains connection with flexible three-wire sheathed cable
  • Water supply connection on the rear centre
  • Water supply connection on the left/right possible with accessories
  • Water supply connection on the bottom
  • Protection class I
  • Protection degree IPX4
  • Nominal voltage 100-240 V AC
  • Mains frequency 50-60 Hz
  • Operating voltage 4.1 V DC
  • Power consumption 5 W
  • Flow pressure 0.1-10 bar
  • Maximum operating temperature, water 25 °C
  • Flush volume, factory setting 6 and 3 l
  • Flush volume large, adjustment range 4.5 / 6 l
  • Flush volume small 3 l
  • Calculated flow rate 0.11 l/s
  • Minimum flow pressure for calculated flow rate 0.5 bar
  • Water supply Side connection Set [Optional]
  • Vario Fastening Set [Optional]
  • Download Installation manual PDF from below
  • Application purposes
  • For floor inlets
  • For renovations, conversions and new buildings
  • For wall inlets with an inlet height of 18 cm
  • For replacing floor-standing WCs with concealed cistern with maximum service opening height < 109cm
  • For replacing low-level exposed cisterns
  • For replacing half-high level exposed cisterns
  • For replacing floor-standing WCs with close-coupled exposed cistern
  • For connecting Geberit AquaClean Sela floor-standing WC
  • For connecting Geberit AquaClean WC enhancement solutions, with accessories
  • For replacing pressure flushing valves
  • For mounting on finished floors
  • For installation in front of dry-walls or solid walls
  • Scope of delivery
  • Water supply connection set with 2 angle stop valves, 1/2"
  • Flush bend extension 160 mm
  • Connection bend made of PP, Ø90mm
  • Sleeve made of EPDM, Ø44 / 55mm
  • Adaptor socket made of PE-HD, Ø90 / 110mm
  • Female socket for mains connection
  • Power supply unit
  • Fastening material
  • Base cover
  • Fastening material for drywall

Water Supply Connection

Water Supply Connection

Lateral Water Supply Connection Set For WC for left or right-hand installation, from Geberit Monolith.

Fastening Set For WC

Fastening Set For WC

The vario fastening set is for WC height 44 to 52cm. Please Note: The image shown is for illustration purpose only.

Sizes Available
Other Sizes / Finishes / Variations Available.
QS Code Finish Size / Difference MFC Code
QS-V93593 - For Wall Hung WC 131.231.SI.5


  • Available Finishes Along With Manufacturing Code
  • White - 131.233.SI.5
  • Black - 131.233.SJ.5
  • Sand - 131.233.TG.5
  • Umber - 131.233.SQ.5

Total: £1233.42 3-4 Working Days Approx QS Supplies

Add-on Selected: Total Price Now:

You May Also Require



Rate this Item.:

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Delivery & Returns
Please enter postcode

At QS Supplies, we use trustworthy carriers for deliveries across UK, Scotland and Ireland. We also follow an up-to-date tracking system to keep you posted on the status of your orders. Delivery dates are approximate, and therefore, we suggest you do not schedule any installation work until you have received the items. To learn more about our delivery service, click here.


For complete information on returns, click here.

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.