Geberit Monolith Sanitary Module 505 x 1140mm For Floor-Standing WC

Geberit Monolith 131.033.SI.5 Details

Geberit Monolith Sanitary Module for Floor-Standing Toilets that is made of glass and comes in a choice of attractive finishes. Designed with a dual flush mechanism, it allows for dimensional tolerances. Its front cladding is made of glass while side cladding is made of brushed aluminium with the cistern fully insulated against condensation. The self-supporting unit features a water supply connection on the rear, which is also possible on the left/right accessories. It has a range of applications in renovations, conversions and new buildings, includes fastening material for ease of installation.

Available in 4 finishes on Glass surfaces and two finishes on Stoneware surfaces.
Available finish in Glass: White, Lava, Sand Grey and Black.
Available finish in Stoneware: Concrete and Slate.
Size [mm]: 505mm x 1140mm [Width x Height].
Size [cm]: 50.5cm x 114cm [Width x Height].
Compensation of dimensional tolerances possible.
Self-supporting.
Adjustable flush volume.
Water supply connection on the rear centre.
Water supply connection on the left/right possible with accessories.
Flow pressure 0.1-10 bar.
Maximum operating temperature, water 25 °C.
Flush volume, factory setting 6 and 3 l.
Flush volume large, adjustment range 4.5 / 6 l.
Flush volume small 3 l.
Calculated flow rate 0.11 l/s.
Minimum flow pressure for calculated flow rate 0.5 bar.
Water supply Side connection Set [Optional].
Vario Fastening Set [Optional].
Application purposes.
For floor inlets.

For renovations, conversions and new buildings.
For wall inlets with an inlet height of 18 cm.
For replacing floor-standing WCs with concealed cisterns with a maximum service opening height of < 109 cm.
For replacing low-level exposed cisterns.
For replacing half-high level exposed cisterns.
For replacing floor-standing WCs with close-coupled exposed cistern.
For connecting Geberit AquaClean Sela floor-standing WC.
For connecting Geberit AquaClean WC enhancement solutions with accessories.
For replacing pressure flushing valves.
For mounting on finished floors.
For installation in front of drywalls or solid walls.
Scope of delivery.
Water supply connection set with two angle stop valves, 1/2inch.
Flush bend extension 160 mm.
Connection bend made of PP, Ø 90 mm.
Sleeve made of EPDM, Ø44 / 55 mm.
Adaptor socket made of PE-HD, Ø90 / 110 mm.
Fastening material.
Base cover.
Fastening material for drywall.

Info / Size (mm)

Frame
Width: 505 mm
Height: 1140 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: White Gloss
⤷ Country of Origin
: Germany
⤷ Warranty/Guarantee
: 10 Years
⤷ Material
: Aluminium, Glass
⤷ Cistern Included
: Yes
⤷ Flush Type
: Dual
⤷ Full Flush Volume in litres
: 6

⤷ Half Flush Volume in litres
: 3
⤷ Width
: 505
⤷ Depth
: 106
⤷ Height
: 1140
⤷ Fixings included
: Yes
⤷ Water Supply Connections
: Bottom

Additional Info & Downloads

Download the Installation Instruction Pdf File

Customise Your Product

Water Supply Connection

Geberit provides you with an ultimate solution for lateral water supply connection by introducing Monolith Set, which is available for left or right-hand installation.

None
OP-142453 - Lateral Water Supply Connection Set For WC + £71.59

Total: £840.08 3-4 Working Days Approx QS Supplies

2 Features Included In This Product Explained

Dual-Flush

A toilet with a flushing mechanism with two different buttons for flushing solid and liquid waste, thereby saving water.

Drywall

Drywall, or wallboard, also called plasterboard or gypsum board, is a common building material used in interiors for constructing walls and ceilings. Drywall is gypsum plaster in the middle with layers of paper or fiberglass mats on either side. Drywalls do not need mortar or plaster. The gypsum core is rigid, and the other surface is smooth.