Bristan Renaissance Single Lever Chrome Kitchen Sink Mixer Tap With Easyfit Base

Bristan Renaissance RS SNKSL EF C Details

Give your freshening moments a fabulously refreshing twist with this chic Bristan Renaissance Kitchen Sink Mixer Tap. Designed with beauty and utility in mind, this aqua stunner is sturdily built from high quality material and will give you years of awesome performance. You can wash and clean and your utensils and food items in minimum effort thanks to the deep reach of the swivel spout. Suitable for all plumbing systems, the tap is suitable for low water pressure and is supplied with flexible connecting pipes for your convenience. A 10 year guarantee supports this kitchen sink mixer tap.

The manufacturing code of this product is RS SNKSL EF C.
It comes in a chrome finish.
Deck mounted installation.
Size of tap [mm]: 115mm x 240mm x 345mm [Width x Depth x Height].
Size of tap [cm]: 11.5cm x 24cm x 34.5cm [Width x Depth x Height].
Base to spout: 210mm (21cm).
Centre of the inlet to centre of outlet: 200mm - (20cm).
Handle type: lever.
Number of tap holes: 1.

Connection inlet: 1/2 inch BSP flexible tails.
Valve cartridge type: 40mm cartridge.
Suitable for all plumbing systems.
Requires a minimum of 0.3 bar to a maximum of 5.0 bar of water pressure.
Maximum hot water supply temperature: 60°C.
Maximum static pressure: 10 bar.
Long-life ceramic cartridge for added durability and ease of use.
Download the Installation Instruction PDF File From The Additional Info Section.
Refer to the technical diagram for complete technical dimensions.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Lifting/Tilting
⤷ Range
: Renaissance
⤷ Handle Position
: Right
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 10 Years
⤷ Material
: Brass
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1
⤷ Spout type
: Fixed
⤷ Valve/Cartridge Type
: 40mm Single Lever Cartridge

⤷ Base To Spout
: 210
⤷ Spout Reach
: 200
⤷ Overall Height
: 345
⤷ Width
: 115
⤷ Inlet Connections
: G1/2 inch
⤷ Minimum Operating Pressure (Bar)
: 0.3
⤷ Handle Style
: Stick
⤷ WRAS Approved
: Yes
⤷ Barcode
: 5014868044408
⤷ Product Type
: Sink Mixer Tap
⤷ Tails
: Flexible Tails

Additional Info & Downloads

Download the Installation Instruction Pdf File

Total: £157.26 2 Working Days Approx QS Supplies

5 Features Included In This Product Explained

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.

Luminance Chrome

It is a hard-wearing chrome plating which is salt-tested and scratch-proof for durable, long-lasting use.

Precise Glide

It comes incorporated with ceramic cartridges for long life with precise control for smooth, leak-free use.

Quick Change

The product can be simply removed and another one fixed in its place. All you need to do is turn off the water supply.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...