Warmup 150W Electric Underfloor Heating StickyMat System SPM1

• An electric underfloor heating mat and cable system with pressure sensitive adhesive for the fastest installation
• It is ideal for use as a primary heat source and in rooms with high heat-loss such as conservatories
• Ultra-thin, 1.8mm cable multistrand, dual core heating cable is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over
• Ideal for regular shaped rooms, where the 0.5m wide mats can be rolled out across the floor in parallel runs
• Pressure sensitive adhesive securely binds the mats to the floor keeping them flat for fast and secure installation
• 150W/ m2 – Provides primary heating in well-insulated areas. Insulation boards retain heat in the room for longer. More importantly, they prevent downward heat-loss. It can be laid on both timber and concrete subfloors
• Floor Type: ceramic floors and stone floors
• Room Type: large areas and regular shape
• Build Type: refurb and new build
• Subfloor Type: slab , screed and concrete or timber suspended and batten floors
• Thermostat not included - sold separately
• Installation manual And Floor section PDF provided in the technical tab
• BEAB Approved and CE marked meeting the highest safety standards for ultimate piece of mind
• Lifetime Warranty & SafetyNet Installation Guarantee from the manufacturer
• Available in 17 sizes optional
  
• Optional Products: Thermostat and Insulation Boards.

• Technical Data:
• Operating Voltage: 220 - 240v: 50Hz
• Ip Rating: IPX7
• Width: 500mm
• Mat Thickness: 3mm
• Cable Thickness: 1.8mm
• Output Rating: 150w/m²
• Inner Insulation: ETFE
• Outer Insulation: ETFE
• Min. Installation Temp: 5°c
• Connection: 3m Long “Coldtail” Connection
• Key Benefits:
• No increase in floor levels: The thinnest dual fluoropolymer coated heating wire – less than 1.8mm
• Durability: Sturdy glass fibre mesh with pressure sensitive adhesive, for the fastest and most secure installation
• Quick Installation: Simply roll out the mat with pre-spaced wire.

Only underfloor heating company whose products are European Compliant, CE marked and accredited by BEAB, cUL, CSA, FIMKO, SEMKO and UL.
Please Note: Read the manual PDF before attempting to install this heater. Incorrect installation could damage the heater and will invalidate your warranty.