Warmup Loose Wire Underfloor Heating Electric System

Warm Up offers you another fine accessory for under floor heating system in the form of this Loose Electric Wire. Crafted with precision, the wire is flexible and easy for installation, especially in small or awkward shaped areas. The heating cable is the strongest and thinnest on the market measuring only 2mm and is double insulated and made from fluoropolymers. It is suited for both primary and secondary heating applications that adhere to Building Regulations. It has been designed for installation under ceramic or natural stone tiled flooring, without digging or mixing concrete. Simply fixing it to the subfloor should be sufficient to ensure the warmth that you need.

• Exceptionally quick response time with the system installed directly beneath the tile floor finish.
• The spacing of the cable can be adjusted to your requirements in desired power output and the layout of the room you are installing the system in.
• It is ideal for installation under ceramic or natural stone tiled flooring.
• Ultra-thin, 1.8mm cable multi-strand, the dual-core heating cable is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over.
• Ideal for irregular-shaped rooms such as bathrooms where the cable can be easily installed around the fixtures.
• The heating cable is the thinnest on the market, only 1.8mm, so it does not raise the floor height visibly.
• The small cross-section of the heating element allows it to be installed without the need for a layer of a self-levelling screed.
• Install a Loose Wire System with a tile adhesive layer under tiles or with a self-levelling compound under other floor finishes.
• Since installing Loose Wire does not require a self-levelling screed, you do not lose any additional time or costs related to the drying of the system. Once the cable is laid down, the floor finish can be installed on top of it.
• Refer to the Installation Manual PDF provided in the technical tab for installation details.
• Floor drawing PDF for slab and joist installation is also provided in the technical tab.
• Loose Wire Underfloor Heating Kit:.
• The loose wire is easy to install because it comes in a kit. The kit contains the necessary elements for installing the Loose Wire System.
• Ultra-thin, 1.8mm cable multi-strand. The dual-core heating cable is double insulated with an advanced fluoropolymer making it exceptionally durable and easy to tile over.
• Primer [for the use of wooden subfloors].

• Tape.
• Roller and foam.
• Installation manual.
• Technical Specification:.
• Operating Voltage: 220 - 240v: 50Hz.
• IP rating: IPX7.
• Cable thickness: 1.8mm.
• Average output rating: 150W/m2.
• Inner and outer insulation: ETFE.
• Min installation temp: 5deg C.
• Max operating temp: 80deg C.
• Connection: 3m Long "Cold tail" connection.
• Optional Products:.
• Thermostat.

Please Note: Before beginning the installation of your DWS Wire heating system, please double check that you have the correct size and number of heaters for your project. Do not tape over the tip of the sensor when securing in place as this may result in inaccurate temperature readings.