My Shopping Basket
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
- Faucet cartridge (disc-type)
- Faucet cartridge (sleeve-type)
- Faucet repair kit
- Fiber scrub pad
- Fiberglass fabric
- Fiberglass insulation
- Fiberglass mending kit
- Fiberglass resin
- Fiberglass wallboard tape
- Flat-cord plug
- Float ball
- Float cup assembly
- Floorcovering adhesive
- Flooring nails
- Flooring remnant
Faucet cartridge (disc-type)
Replacement cartridge for repair of disc-type faucets; the entire cartridge is replaced instead of replacing washers and o-rings.
Take the old unit with you when you purchase a replacement to ensure you find the right one.
Faucet cartridge (sleeve-type)
Replacement cartridge for repair of sleeve-type faucets; the entire cartridge is replaced instead of replacing washers and o-rings.
Faucet repair kit
General purpose repair kit containing replacement washers, o-rings, screws and other materials for a variety of faucet brands.
Fiber scrub pad
Used to help scrub difficult stains and dirt from walls.
Fiberglass fabric
Fiberglass meshes material that is used with fiberglass resin to make durable repairs on metal surfaces.
Use sharp scissors to cut this material.
Wear gloves when handling fiberglass, and use care when operating cutting tools.
Fiberglass insulation
Cotton candy-like material used for attic and wall insulation, and also for stuffing into cracks and holes as a support base for caulking repairs.
Use sharp scissors to cut this material.
Wear gloves when handling fiberglass, and use care when operating cutting tools.
Fiberglass mending kit
Package contains fiberglass fabric and resin.
Resin sets up fairly quickly so have everything ready before you spread it.
Wear gloves when working with fiberglass products and work in a well-ventilated area when using resin.
Fiberglass resin
Liquid brushed onto fiberglass fabric which impregnates the fabric and produces a very strong surface when dry.
Resin sets up fairly quickly so have everything ready before you spread it.
Wear gloves when working with resin and work in a well-ventilated area.
Fiberglass wallboard tape
Flexible mesh tape with a sticky surface for covering seams in wallboard prior to applying taping compound.
Make certain that surfaces are clean and dry without any loose particles before applying the tape or it will not adhere well
Flat-cord plug
Plug used with flat, 2-wire cords.
Avoid a potential shock hazard by not stripping too much insulation away from the cord wire.
Float ball
Balls at end of float arm on plunger valve and diaphragm ballcocks. The float ball screws onto threads at the end of the float arm
Float cup assembly
Toilet flushing ballcock-like valve that uses a float that moves up and down around the valves assembly instead of a float ball at the end of a float arm as found on traditional ballcocks.
Take the old parts with you when you purchase replacements to ensure you find the parts you need.
Floorcovering adhesive
Adhesive used with vinyl sheet floor coverings and floor tiles.
Clean applicators in solvent immediately after use, or use throwaway applicators—once dry the adhesive is extremely difficult to remove.
Work in a well-ventilated area when using adhesive.
Flooring nails
Nail with spiral flutes for securely holding flooring in place and with less chance of the flooring loosening.
These nails are very difficult to pull out so make certain you drive them only where you want them.
Always wear protective eye wear when using striking tools.
Flooring remnant
Piece of leftover flooring used when making flooring repairs.
If you don't have any flooring remnants, try cutting a piece for your repairs from an inconspicuous spot, such as in a closet or under a large appliance.
More Resources and Useful Links
| QS Supplies Live chat |
