Hudson Reed Indus Round Twin Concealed Thermostatic Shower Valve Chrome

Hudson Reed Indus RND3210 Details

Simply striking Hudson Reed brings you the versatile Indus Twin Concealed Thermostatic Valve suitable for vertical or horizontal installation. The thermostatic valve comes with safety features like a self-activating turn-off system in case of water supply failure. For further safety, it includes a control that holds the temperature within +/- 2 to 3 degrees during fluctuating water pressure and an Anti-Scald feature to prevent water burn injuries. Approved by WRAS, it is best suited to low water pressure systems.

Available with or without diverter - [Optional].
Back plate Size [mm]: 67mm x 220mm [Width x Height].
Back plate Size [cm]: 6.7cm x 22cm [Width x Height].
Depth: 135mm (13.5cm).
Handle design: Round.
Number of handles: 2.
Back-plate: Oval.
It can be installed vertically or horizontally.
Mount type: Wall / Recess.
Slimline design.
Suitable for all plumbing systems - gravity-fed pumped unvented high pressure or fully modulated combi-boilers.
Pipe Size: 15mm (1.5cm) (1/2inch BSP).

Manufactured using the latest technique of thermostat.
Suitable for low-pressure water system.
Requires 0.1 bar operating water pressure.
Thermostatic control to +/- 2 degrees even if the water pressure fluctuates.
In the event of hot or cold water failure, the valve will shut down the water supply and prevent scalding.
The cartridge is fully reversible - it doesn't need re-plumbing if hot and cold supplies are the wrong way around it.
TMV2 approved no.: BC1875/0817.
TMV3 approved no.: BC1119/1212.
WRAS approved no.: 1703023.
Refer technical drawing for more details.
Download the Customer datasheet and installation instructions PDF File from the Additional Info Section.
20 years guarantee from Hudson Reed against manufacturing defect.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Shape
: Oval
⤷ Warranty/Guarantee
: 20 Years
⤷ Material
: Brass/ABS
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.5 bar - 13, 1 bar - 17, 2 bar - 24, 3 bar - 27
⤷ Handle Style
: Knob
⤷ Depth
: 135

⤷ Temperature Control
: Thermostatic
⤷ Backplate Width
: 67
⤷ Backplate Height
: 220
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 2
⤷ Orientation
: Vertical or Horizontal
⤷ Plumbing Option
: Concealed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc

Additional Info & Downloads

Download the Customer Datasheet Pdf File Download the Installation Instructions Pdf File

Total: £179.50 2 Working Days Approx QS Supplies

9 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

Optional: Diverter In Showers

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Hudson Reed Indus Round Twin Concealed Thermostatic Shower Valve Chrome

MFC Code: RND3210

Hudson Reed Indus RND3210 Details

Technical Specifications

Additional Info & Downloads

9 Features Included In This Product Explained

Reviews & Ratings