QS Supplies
Call UsCall Us

Call Us: 0116 251 0051Call us today until 5:00pm

Added Cart Added to Cart

Imex Xcite Chrome Single Lever Basin Mixer Tap With Clicker Waste


RRP: £129.00


5 Working Days Approx.

3.5 out of 5 3.5 out of 5

Based on 2 Ratings.

Shipping: £7.95

Select Variations
You've Selected: OP-165519 - 120mm
Key Features
  • Made using brass material
  • WRAS approved fittings
  • Fully compatible with UK plumbing systems
  • Fitted with the high-quality cartridge to ensure smooth flow
  • Ten years of guarantee from the manufacturer against any manufacturing defects
SKU Code: QS-V15202


Imex Xcite XCSBAS Details

Bring in a little excitement and fun in your bath area with Imex Xcite Single Lever Small Basin Mixer Tap with Clicker Waste. It will leave you speechless with its charming design and glowing chrome finish. Smooth-functioning and compatible with all UK plumbing systems, it requires a minimum of 0.2 bar water pressure and a minimum flow rate of 4.5 litres per minute. Made of excellent quality brass, it is guaranteed for 10 years against any defect in material or manufacturing.

  • Available in 3 heights - 120mm, 132.8mm, 296.8mm.
  • Complete with slotted clicker waste.
  • Chrome finish.
  • The minimum water pressure Recommended for smooth working is 0.2 bar [LP-Low Pressure].
  • The minimum flow rate of this product is 4.5 litres per minute at 0.2 bar water pressure.
  • For complete size details, please refer to the technical drawing.
  • Specification 120mm Tap.
  • Size [mm]: Ø 45mm x 120mm [Width [Diameter] x Height].
  • Size [cm]: Ø 4.5cm x 12cm [Width [Diameter] x Height].
  • The centre of the inlet to the centre of the outlet is 90mm [9cm].
  • Specification 132.8mm Tap.
  • Size [mm]: Ø 50mm x 132.8mm [Width [Diameter] x Height].
  • Size [cm]: Ø 5cm x 13.28cm [Width [Diameter] x Height].
  • The centre of the inlet to the centre of the outlet is 98mm [9.8cm].
  • Specification 296.8mm Tap.
  • Size [mm]: 133mm x 296.8mm [Depth [Projection] x Height].
  • Size [cm]: 13.3cm x 29.68cm [Depth [Projection] x Height].
  • The centre of the inlet to the centre of the outlet is 98mm [9.8cm].

Info / Size (mm)

  • Tap
  • Pipe Centre: 90 mm

Technical Specifications

Please note all the measurements are in 'mm'
  • ⤷ Water Activation
  • : By Lifting
  • ⤷ Tap Body Shape
  • : Round
  • ⤷ Handle Position
  • : Upwards
  • ⤷ Range
  • : Xcite
  • ⤷ Colour
  • : Chrome
  • ⤷ Warranty/Guarantee
  • : 10 Years
  • ⤷ Material
  • : Brass
  • ⤷ Theme
  • : Modern
  • ⤷ Installation Type
  • : Deck Mounted
  • ⤷ No. of Holes Required
  • : 1
  • ⤷ Spout type
  • : Fixed
  • ⤷ Handle Material
  • : Brass
  • ⤷ Base To Spout
  • : 52
  • ⤷ Spout Reach
  • : 90
  • ⤷ Overall Height
  • : 120
  • ⤷ Width
  • : 45
  • ⤷ Inlet Connections
  • : G 1/2"
  • ⤷ Minimum Operating Pressure (Bar)
  • : 0.2
  • ⤷ Waste Type
  • : Clicker
  • ⤷ Flow Rates (l/min)
  • : 0.2 bar - 4.5
  • ⤷ Handle Style
  • : Lever
  • ⤷ WRAS Approved
  • : Yes
  • ⤷ Waste Included
  • : Yes
  • ⤷ Compliance/Approvals/Standard
  • : WRAS
  • ⤷ Barcode
  • : 5057199224156
  • ⤷ Product Type
  • : Basin Mixer Tap

Total: £70.49 5 Working Days Approx QS Supplies

3 Features Included In This Product Explained

WRAS Approved Component

WRAS Approved Component

A WRAS-approved component refers to a product or fitting that can be used with the public mains water supply in the UK as it satisfies the conditions outlined by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. The regulations require that a product, material or fitting not cause any misuse, excessive consumption, wastage or contamination of the water supply and must be 'of the right quality and standard'. Such components can be whole products (valves) or materials used to manufacture products (rubber).

Low Water Pressure

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.

Single Lever Taps

Single Lever Taps

These taps are designed with a single lever or handle to control the water's temperature and flow. Extremely easy to operate, these also allow you to preset the water temperature by leaving it in the position with your preferred water temperature. Besides, it is simple to control the flow of water; the higher you lift the lever or move it to the end, the stronger the water flow.

Add-on Selected: Total Price Now:

Reviews & Ratings

Rate this Item.:

Hide All Reviews
From : Dorset Overall Rating: Date: March 9, 2017 modern
brilliant 2nd one I have owned looks good and modern goes well in my new bathroom
Helpful? Thumbs Up Thumbs Down
Value for Money
From : Sheffield Overall Rating: Date: June 13, 2015 Stylish
Stylish little tap perfect for a cloakroom hand wash basin. Good quality.
Helpful? Thumbs Up Thumbs Down
Value for Money
From : RADSTOCK Overall Rating: Date: November 18, 2020 Mono tap
Great quality and easy to install. Would recommend purchase to family.
Helpful? Thumbs Up Thumbs Down
Value for Money
From : thornham Overall Rating: Date: June 15, 2015 QS-V15202
Helpful? Thumbs Up Thumbs Down
Value for Money

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Rachel Asked :

What's a clicker waste?

Answered By QS Team Answered by the QS Technical Team

It has a simple design making it easy to use. You push down on the stopper once to close it and click it again to open it. Click-clack wastes are also referred to as push-button wastes or sprung plug.

Was this answer helpful?
Accepted Answer 1 Thumbs Down 0
Imex Xcite Range Of Products
Popular Categories At QS
Write Your Review.
Enter Your Name
Enter Your City
Enter Review title
Please enter your review comment

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style
Ask A Technical Question
Please enter your name

Please enter your valid email address Invalid email address

Please enter your question

Delivery & Returns
Please enter postcode

At QS Supplies, we use trustworthy carriers for deliveries across UK, Scotland and Ireland. We also follow an up-to-date tracking system to keep you posted on the status of your orders. Delivery dates are approximate, and therefore, we suggest you do not schedule any installation work until you have received the items. To learn more about our delivery service, click here. Please do not book Tradesmen until the items are safely received and thoroughly checked.


Before travelling for collections, please wait for a formal communication from us confirming your order is ready. For urgent orders, we recommend you call ahead to check lead times. Our Sales Team can be reached at 0116 251 0051, Monday to Friday from 8.30 am to 5.00 pm.


For complete information on returns, click here.

Notify me when this product is in Stock
Please enter your name
Please enter your valid email address Invalid email address
Please enter your contact no
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.