QS Basics Elegant 586 x 600mm Horizontal Single Panel Radiator

QS Basics Elegant QSB-2102 Details

Available in 2 finishes: Satin White and Anthracite.
Size [mm]: 586mm x 94mm x 600mm [Width x Depth x Height].
Size [cm]: 58.6cm x 9.4cm x 60cm [Width x Depth x Height].
Suitable for wall-mounted installation.
Wall to the centre of tappings: 51.
Type of heat: water.
No. of heat setting: 1.
Projection from wall: 110mm (11cm).

Number of Sections/Panels: 10.
BTU: @30°C - 701, @50°C - 1361 and @60°C - 1723.
Watts: @30°C - 205, @50°C - 399 and @60°C - 505.
Supplied with fixing screws and brackets.
All tappings are 1/2inch British standard pipe.
After installing any new radiators when refilling the system, it is recommended a suitable inhibitor is used.
Valves shown in the image are not included.
Refer to the technical drawing for more details.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Elegant
⤷ Colour
: Satin White
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Steel
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Width
: 586
⤷ Projection (Depth)
: 94

⤷ Height
: 600
⤷ Orientation
: Horizontal
⤷ BTU Output
: 30°C - 701 | 50°C - 1361 | 60°C - 1723
⤷ Watts
: 30°C - 205 | 50°C - 399 | 60°C - 505
⤷ Fuel Type
: Central Heating
⤷ Wall to Centre of Inlet
: 51
⤷ Panel Configuration
: Single

Total: £128.99 5-7 Working Days Approx QS Supplies

4 Features Included In This Product Explained

BTU Output

It is the short form of a British thermal unit (BTU or Btu) and is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It is a standard unit against which radiator efficiency is measured.
Read more...

Watts Output

Unit of power to measure electric current.

CE Certified Product

CE mark meets the prescribed safety, health and environmental protection requirements and all appropriate EU requirements. This mark is mandatory for products designed, made and sold in the European Economic Area.

UKCA Certified

UKCA or the UK Conformity Assessed marking is a mandatory UK product marking for products sold across Great Britain, equivalent to the CE Marking in Europe. UKCA will be used to replace the CE Marking. CE marking will no longer be valid in England, Scotland and Wales except in Northern Ireland from the 1st of January 2021, and the CE mark will stay valid until the 1st of January 2023. A product with UKCA marking shows that the product complies with the UKCA Marking requirements.

QS Basics Elegant 586 x 600mm Horizontal Single Panel Radiator

MFC Code: QSB-2102

QS Basics Elegant QSB-2102 Details

Technical Specifications

4 Features Included In This Product Explained

Reviews & Ratings