Bristan Index 1.0 Easyfit Stainless Steel Kitchen Sink

Bristan Index SK INXSQ1 SU Details

The Bristan Index 1.0 Easyfit Kitchen Sink is pre-fitted with an Easyfit tap base, flexible inlet pipes and isolators, this unit also comes with a strainer waste, an overflow, pipework and fixings. Made to last from strong and high-quality 0.8mm gauge, 304 grade, 18/8 stainless steel metal material, this unit also includes a cutting hole template and requires a minimum cabinet width beneath it of at least 500mm. With a drainage flow rate of up to 39.7 litres per minute, this product also boasts one tap hole that is compatible with any single kitchen tap style.

Manufacturing code of this product: SK INXSQ1 SU.
It comes in a fabulous stainless steel finish.
Size in [mm]: 860mm x 500mm x 205mm [Length x Width x Height].
Size in [cm]: 86cm x 50cm x 20.5cm [Length x Width x Height].
Minimum cabinet width: 500mm - (50cm).
Connection Inlet: 1/2 inch BSP Flexible Tails.

Connection Outlet: G1 1/2inch.
Drainage Flow Rate: 39.7 (litres per minute).
Made to last: 0.8mm gauge, 304 grade 18/8 stainless steel for stain, corrosion and rust resistance.
Includes cutting-hole template.
Download the Installation Instruction PDF File From The Additional Info Section.
Refer to the technical diagram for complete technical dimensions.

Info / Size (mm)

Sink
Length: 860 mm
Width: 500 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Stainless Steel
⤷ Overall Length
: 860
⤷ Overall Width
: 500
⤷ Length of Main Bowl
: 400
⤷ Width of Main Bowl
: 400
⤷ Depth of Main Bowl
: 205

⤷ Material
: Stainless Steel
⤷ Gauge / Thickness
: 0.8
⤷ Waste Included
: Yes
⤷ Waste Type
: Strainer Waste
⤷ Fixings included
: Yes
⤷ Warranty/Guarantee
: 25 Years Of Sink, 5 Years Of Easyfir Base

Additional Info & Downloads

Download the Installation Instructions Pdf File

Total: £131.69 2 Working Days Approx QS Supplies

1 Features Included In This Product Explained

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.

Bristan Index 1.0 Easyfit Stainless Steel Kitchen Sink - Sk Inxsq1 Su

MFC Code: SK INXSQ1 SU

Bristan Index SK INXSQ1 SU Details

Technical Specifications

Additional Info & Downloads

1 Features Included In This Product Explained

Reviews & Ratings