1810 Company Veloreduo 100i Satin 1.5 Bowl Kitchen Sink And Drainer

1810 Veloreduo VD/100/I/P/REV/048 Details

Replace your old sink with a larger, much more accommodating one with the 1810 Company Veloreduo 100i 1.5 Bowl Kitchen Sink And Drainer. This product features a larger bowl and a half bowl with rounded corners for an industrial look. It comes with a 3.5-inch basket strainer waste with overflow and a maximiser plumbing kit. This sink is made of high-grade stainless steel and has a seamless one-piece design. A vast 75 years of guarantee from the manufacturer assures of its impeccable quality.

The manufacturing code of this product is VD/100/I/P/REV/048.
Inset bowl and drainer.
Overall Size: 1000mm x 500mm [Length x Width].
Size of the main bowl: 340mm x 400mm x 160mm [Length x Width x Depth].
Size of small bowl: 160mm x 300mm x 90mm [Length x Width x Depth].
Steel thickness: 0.8mm.
Single-piece construction.

Supplied with maximiser plumbing kit.
Minimum cabinet size: 600mm.
Reversible design.
Complete with fixing kit.
Refer to the technical diagram for more technical details.
Waste tidy optional [See Option].

Info / Size (mm)

Sink
Length: 1000 mm
Width: 500 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Satin
⤷ Installation/Style
: Inset
⤷ Number of Bowls
: 1.5
⤷ Drainer Position
: Reversible
⤷ Overall Length
: 1000
⤷ Overall Width
: 500
⤷ Minimum Base Unit Size Required
: 600
⤷ Length of Main Bowl
: 340
⤷ Width of Main Bowl
: 400
⤷ Depth of Main Bowl
: 160
⤷ Length of Small Bowl
: 160

⤷ Width of Small Bowl
: 300
⤷ Depth of Small Bowl
: 90
⤷ Material
: Stainless Steel
⤷ Gauge / Thickness
: 0.8
⤷ Plumbing Kit
: Yes
⤷ Waste Included
: Yes
⤷ Waste Type
: Basket Strainer
⤷ Waste Hole Size
: 90
⤷ No. of Tap Holes
: 1
⤷ Fixings included
: Yes
⤷ Warranty/Guarantee
: 75 Years

Total: £169.51 5 Working Days Approx QS Supplies

5 Features Included In This Product Explained

CE Certified Sink

All 1810 kitchen sinks are manufactured to the highest standard and are built to comply with Construction Products Directive (89 / 106 / EEC). These sinks are CE certified and tested to BS EN 13310: 2003 / BS EN 13310: 2015 standard.

With / Without Overflow

An overflow is a small hole or opening at the upper part of a sink, basin, bidet or tub that drains away water upon reaching its level so that no water is spilt. When a basin or bath does not come with this design feature, it is called “without overflow” and will need a compatible drain.

Reversible Design

It is a design which allows the product to be fitted either to the right or left, depending on the dimensions of your space.

Stainless Steel Material

Stainless Steel is an iron alloy with anti-rust and anti-corrosive properties, unlike iron. It contains a minimum of 10.5% of chromium and less than 1.2% of carbon and other metal alloys. Its corrosion resistance and mechanical properties can be improved by adding nickel, molybdenum, titanium, niobium, or manganese. This robust, hygienic, hard-wearing base material is popular in the construction of steel products.

Inset Sink

Inset sink units can be installed above the worktop - typically used with plastic worktops fixed with a clamping plate as a support material and a seal fitted underneath the sink flange to prevent water from getting under and dripping into the kitchen unit.