Call Us

Call Us: 0116 251 0051 Call us today until 6pm

Stuart Turner PH 45 ES B End Suction Boostamatic Pump


MFC CODE: 46524


RRP: £482.40


3 Working Days Approx

Shipping: FREE* Check Postcodes


This Stuart Turner Boostamatic Pump will successfully deliver pressurised water supply from a break tank. It does not require a gravity flow of water for activation. This unit comes with fully automatic control with positive and negative head. It has a built-n no water cut out and is designed for noiseless operation. This unit is constructed from high quality brass for delivering exceptional long-term performance. For sealing your buying decision, this WRAS approved unit comes with a 1-year manufacturer guarantee.

+  Read what's included..
Please Note all the measurements are in 'mm'
Weight in kg 7.5
Country of Origin UK
Warranty/Guarantee 1 year
Material Brass
Width 257
Depth 133.5
Height 292
Pump Type Peripheral Pump
Impeller Single
Head Positive / Negative
Motor Type Induction, auto-reset thermal trip
Motor Rating Continuous
Fuse rating 5 Amps
Power Supply 230 Volts AC
Power Consumption 665 Watts
Maximum Operating Pressure (Bar) 6 bar
Mechanical seal EPDM / PTFE / Al. Oxide
Anti Vibration Feet Yes
Dry Run Protection Yes

Stuart Turner 46524 Details

  • Peripheral pump
  • Constructed from high quality brass
  • Manufacturing code of this product is 46524
  • Designed to provided a pressurised water supply from a break tank in either positive or negative head application and do not require a gravity flow of water to activate
  • All models are ideal for automated pressurisation of hot or cold water services in a single dwelling, or commercial premises
  • Fully automatic control - positive and negative head
  • No on-site setting/commissioning
  • Built in ‘no water’ cut out
  • No pulsing during operation
  • Easy installation
  • Quiet operation
  • Compact size
  • G 1 female pump connections
  • Pre-wired with 1.5 metre power cable
  • WRAS approved
  • Size: Length 257mm x Width 133.5mm x Height 292mm
  • 1 year guarantee from the manufacturer
  • Technical Specifications:
  • Mechanical seal - Nitrile / Carbon / Ceramic
  • Maximum head [closed valve] - 41 metres
  • Performance @ 9 l/min - 3.2 bar
  • Performance @ 18 l/min - 2.2 bar
  • Maximum flow - 42 l/min
  • Minimum static inlet pressure - 0.1 bar [1 metre]
  • Maximum static inlet pressure - 1.4 bar [14 metres]
  • Maximum static outlet pressure - 1.4 bar [14 metres]
  • Maximum working pressure* - 600 kPa [6 bar]
  • Maximum ambient air temperature - 40 °C
  • Min / Max water temperature** - Min 4 °C / Max 65 °C
  • Maximum suction lift*** - 4.6 metres
  • Pressure vessel air pre-charge - 0.9 bar [13 psi]
  • Power supply / phase / frequency - 230 V a.c./ 1 / 50 Hz
  • Current [full load] - 2.4 Amps
  • Power consumption - 540 Watts
  • Fuse rating - 5 Amps
  • Power cable [pre-wired] - 1.5 metres
  • For more technical information and installation instruction, download PDF from technical tab.

* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
*** With foot valve fitted.
Although these pumps are self-priming we recommend a foot valve/strainer is used if a suction lift is required.

Additional Info

Total: £349.96 3 Working Days Approx QS Supplies

You've Selected which adds to a total of

You May Also Require


Reviews & Ratings

Rate this Item.:

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Delivery & Returns
Please enter postcode

At QS Supplies, we use trustworthy carriers for deliveries across UK, Scotland and Ireland. We also follow an up-to-date tracking system to keep you posted on the status of your orders. Delivery dates are approximate, and therefore, we suggest you do not schedule any installation work until you have received the items. To learn more about our delivery service, click here. Please do not book Tradesmen until the items are safely received and thoroughly checked.


Before travelling for collections, please wait for a formal communication from us confirming your order is ready. For urgent orders, we recommend you call ahead to check lead times. Our Sales Team can be reached at 0116 251 0051, Monday to Friday from 8.30 am to 5.00 pm.


For complete information on returns, click here.

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.