The JAVA range of basin, bath and kitchen taps recognizes the desire to create uncomplicated but elegant highlights which play so well in the design of modern minimalist bathrooms. The JAVA Mixer Tap is used in both traditional and modern contexts adapting to both periods of fashion with style and elegance.
- Bristan Java Bath Shower Mixer Taps
- Solid Brass Construction
- Chrome Finish
- Bath Shower Mixer / Filler with Cartridge:
- 2 x Extension for Bath Mounting. You have a choice for Wall or Bath Mounting
- Brand New and Boxed
- Works on 0.5 Bar Pressure. Good Flow Rate even at low pressure.
- The Taps and Shower will work on the following systems
- Combination boiler systems
- Gravity fed systems
- Pumped hot water systems Un-vented hot water systems
- Std hot water cylinder type systems
- According to the Bristan Water Regulations Advisory
Service Scheme WRAS all items fitting to the water system, be it taps,
Toilets should confirm by law to the established WRAS standards.
Suppliers selling items fitting onto the water system do not have to
have a WRCS certificate. Hence, they are a number of sellers both online
and on High Street selling products which are inferior cheap and
totally inadequate for long lasting life.
- Our WRCS Approved Taps have been tested for
- No Use of Materials which are Hazardous to health and
contamination to the water system. Many Imported taps use materials
which cosmetically look good but have an allergic reaction to some
people. Would you trust your health with cheap imports
All non Metallic materials washers, ceramic disc, cartridges in contact with water are tested and complies to BS6920.
To cut cost suppliers will use washers which results in leaking tap. Our Products uses Cartridges which lasts longer
The
Taps are Pressure tested to 16 Bar. Normal Domestic Pressure is 5 Bar.
Therefore our Taps are tested for Leaks. You do not want a Leaking Taps
in your Bathroom. Difficult to get the Plumbers in once!
Mechanical
Joints are tested. No Snapping of Joints, welds etc.Our Products are
made of Solid Brass.In Order to cut Costs many suppliers will sell their
products mixed with ZINC. This is cheap and brittle metal which does
not last. Would you want to replace the taps in a years time.? It would
cost you at least £60.00 labour to replace the taps. Ask the supplier
what material are used.?
- Chrome Plating is an expensive process. Our WRCS Taps
have 40 microns of chrome thickness Therefore higher corrosion
protection. To cut cost suppliers will sell their product with 10-20
micros of chrome thickness resulting in unsightly appearance over short
period of time.
Fatigue Test or Confidence Test. The Taps are tested two
hundred thousand times , 200,000, for normal operation to see if it can
endure this period of use. That's why we give 5 Years Warranty with our
taps. Taps without the WRCS certificate may only last you two or three
months or at most a year, needing you to replace them again. REMEMBER It
costs you to get them changed.
Buy with Confidence.