QS Supplies
Call UsCall Us

Call Us: 0116 251 0051Call us today until 5:00pm

Added Cart Added to Cart

Armitage Shanks Contour 21 - Thermostatic Sequential Basin Mixer Tap - Long Lever

£399.41

STOCK AVAILABILITY

2-3 Working Days Approx

5.0 out of 5 5.0 out of 5

Based on 1 Ratings.

Shipping: £7.95

Select Variations
You've Selected: OP-165680 - Copper Tails
Key Features
  • WRAS and TMV 3 Approved
  • DDA compliant
  • Thermostatically set to 41°C with a single lever to control the water flow.
  • Meets the requirements laid out in HTM 64, HTM 04
  • Five years of guarantee from the manufacturer against any manufacturing defects.
SKU Code: QS-V28924

MFC Code: A4169AA

Armitage Shanks Contour A4169AA Details

Armitage Shanks Contour 21 Thermostatic Sequential Basin Mixer Tap has been one of the best-selling accessories across the UK for its excellent fabrication. Crafted from the finest chrome-plated brass, its performance is most dependable. Its single long lever facilitates operation. It offers a minimum flow rate of over 4.7 litres per minute at 3.0 bar water pressure. Water-saving design that is just right for modern lifestyles, it is approved by WRAS and TMV 3. Suitable for use with handrinse basins in public areas and the Doc M basin, it functions perfectly in high and low water pressure systems and is also available with copper tails.

  • Constructed from top quality chrome plated brass.
  • The centre of the Inlet to the Center of the Outlet is 100mm.
  • The minimum water flow rate is 4.7 litres per minute at 3.0 bar water pressure.
  • Features water saving.
  • Suitable for use with hand rinse basins in public areas and Doc M.
  • The single easy-use lever operates on/off, and temperature control.
  • Ideal for high and low-pressure systems.
  • Eliminates the need for premixed water.
  • Traditional back-nut fixing for added security.
  • It fits into a standard pillar tap hole.
  • Durable and easy-to-clean finish.
  • Flow rate stays constant even when the temperature setting is changed [providing supply pressure is 1.0 bar or higher].
  • Supplied complete with filter/check valves and flow limiters.
  • Serviceable from above the basin once supplies are isolated.
  • Cartridge-based system for easy servicing or repair.
  • Frequently used in education, factory, general healthcare, hotels, office, public building, offices, public buildings, retail, vandal risk, pubs and clubs, sports and leisure applications.
  • Anti-vandal laminar flow nozzle.
  • Suitable for commercial use.
  • Flexible tails included.
  • Specifications For Basin Mixer Tap With Copper Tails:.
  • Height 160mm.
  • Weight is 2.85 kg.
  • Specifications For Basin Mixer Tap With Flexible Tails:.
  • Size - Depth 154mm x Height 151mm.
  • Weight is 2.70 kg.

Info / Size (mm)

  • Tap
  • Pipe Centre: 100 mm

Technical Specifications

Please note all the measurements are in 'mm'
  • ⤷ Water Activation
  • : By Rotating
  • ⤷ Range
  • : Contour 21
  • ⤷ Tap Body Shape
  • : Round
  • ⤷ Handle Position
  • : Upwards
  • ⤷ Colour
  • : Chrome
  • ⤷ Country of Origin
  • : EU
  • ⤷ Warranty/Guarantee
  • : 5 Years
  • ⤷ Material
  • : Brass
  • ⤷ Theme
  • : Modern
  • ⤷ Installation Type
  • : Deck Mounted
  • ⤷ No. of Holes Required
  • : 1
  • ⤷ Spout type
  • : Fixed
  • ⤷ Handle Material
  • : Brass
  • ⤷ Base To Spout
  • : 49
  • ⤷ Spout Reach
  • : 100
  • ⤷ Overall Height
  • : 160
  • ⤷ Max. Deck Thickness
  • : 36
  • ⤷ Minimum Operating Pressure (Bar)
  • : 3
  • ⤷ Water Saving
  • : Yes
  • ⤷ Flow Rates (l/min)
  • : 3 bar - 4.7
  • ⤷ Handle Style
  • : Lever
  • ⤷ WRAS Approved
  • : Yes
  • ⤷ Waste Included
  • : No
  • ⤷ Compliance/Approvals/Standard
  • : DDA / WRAS / TMV3
  • ⤷ Barcode
  • : 4015413303743
  • ⤷ Product Type
  • : Commercial Basin Tap


Additional Info & Downloads


Total: £399.41 2-3 Working Days Approx QS Supplies

6 Features Included In This Product Explained

Low Water Pressure

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

High Water Pressure

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.

WRAS Approved Product

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

TMV3 Approved Product

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

Temperature control

Temperature control

The Thermostatic mixers come with a temperature control mechanism which saves temperature that stays constant at all times. Some of the mixers from the company come with a control button with a pre-set temperature of 40°C(minimum) so that you can save on your energy bills.

Doc-M Pack

Doc-M Pack

A Doc M pack is an assortment of sanitary ware compliant with disabled washroom provisions in Document M of the UK Building Regulations. These Doc M regulations apply to new commercial spaces but can also be installed in older buildings. People with disabilities may need to use washrooms in different kinds of buildings-both old and new. Doc M makes it very easy for those with disabilities who are wheelchair-bound. These packs are comforting and offer ease of use for wheelchair-bound and elderly users, also come with ergonomic design and attractive colours.

Add-on Selected: Total Price Now:

Reviews & Ratings

Rate this Item.:

Hide All Reviews
From : uxbridge Overall Rating: Date: March 2, 2017 Spot on
Best price good spec
Helpful? Thumbs Up Thumbs Down
Quality:
Style
Value for Money

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Steven Asked :

Hi, I need to remove the cartridge to change the washers, but I can't get it out. The frame of the tap is higher than the cartridge, so adjustable spanners do not fit. Is there a specific tool that is required? or has the tap been installed incorrectly? Thanks Steven

Answered By QS Team Answered by the QS Technical Team

Refer installation instruction PDF provided in the technical tab, see section 5 of the PDF, which shows how the cartridge is replaced. The cartridge size is 36mm AF, an appropriate spanner is required.

Was this answer helpful?
Accepted Answer 1 Thumbs Down 0
Armitage Shanks Contour Range Of Products More From Armitage Shanks Contour
Popular Categories At QS


Write Your Review.
Enter Your Name
Enter Your City
Enter Review title
Please enter your review comment

How Many Stars Would You Give for the Following?

Quality:  
Rate the product on quality
Value For Money:  
Rate the product on value for money
Style:  
Rate the product on style
Ask A Technical Question
Please enter your name

Please enter your valid email address Invalid email address

Please enter your question

Delivery & Returns
Please enter postcode
Delivery

At QS Supplies, we use trustworthy carriers for deliveries across UK, Scotland and Ireland. We also follow an up-to-date tracking system to keep you posted on the status of your orders. Delivery dates are approximate, and therefore, we suggest you do not schedule any installation work until you have received the items. To learn more about our delivery service, click here. Please do not book Tradesmen until the items are safely received and thoroughly checked.

Collections

Before travelling for collections, please wait for a formal communication from us confirming your order is ready. For urgent orders, we recommend you call ahead to check lead times. Our Sales Team can be reached at 0116 251 0051, Monday to Friday from 8.30 am to 5.00 pm.

Returns

For complete information on returns, click here.

Notify me when this product is in Stock
Please enter your name
Please enter your valid email address Invalid email address
Please enter your contact no
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

View