The bath-mounted shower mixer tap kit purchased is of good quality and fits perfectly. It was delivered on time, well-packaged and undamaged. This was my first purchase from QS Supplies. I found it reliable and effective. I will therefore not hesitate to purchase from them in future.
Submit Your Questions 3 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
James Asked :
Hi, the technical information says the inlet centres are 180 apart. Because the inlet pipes are cranked, I was wondering if it's possible to turn them both inwards to reduce that distance to 150mm to match my existing bath holes.
Yes. It has an adjustable inlet centre from a minimum of 100mm and a maximum of 300mm. The standard inlet centre is 200mm. For more technical information, please refer technical drawing available on the product page. You can also download the Customer datasheet available in the "Additional Info" section of the product.
Brian Asked :
Hi, We moved into our property 3 years ago, and we are in the process of renewing things in our house. The bath has a Beaumont Brassware bath mixer tap which I think is about 10 - 12 years old. The model has cranked legs, and I think it is 1303X. We had various plumbing jobs a week ago and purchased a new mixer tap to replace the faulty Beaumont tap. However, the taps are totally inaccessible, and I am now looking to replace just the top half and keep the feet. So my question is regarding the thread on the nut on the cranked feet. I have looked at other makes, and the thread is quite tight, whereas, on our one, there are only a few turns to tighten. So does the current model fit the older models?
The cranked-leg Beaumont bath shower mixer is i303X, and the pipe centres are about 190mm apart. If you already have the legs plumbing in, buy a new tap BC304 in our Topaz range or i303X and use the original legs in the bath to fit the new tap, and they will fit ok.
janine Asked :
Can you tell me if the cranked bath mixer taps can be adjusted to fit a 200mm gap between the holes in the bath? They are listed to fit a 180mm gap.
We are afraid these can't be adjusted to fit a 200mm gap.
We will soon verify the details and add your rating appropriately.