Nuie Beaumont Traditional Basin Mixer Tap, Pop-Up Waste, Crosshead Handles

Nuie Beaumont Details

MFC: I345X

The dynamic shape of Nuie Bathrooms Beaumont Mono Basin Mixer Tap is an instant attraction while its fabulous chrome finish enhances its appeal further. The dainty crosshead design reminds one of a bird about to set flight and looks just amazing at the wash basin. Suitable for deck-mounted installation, it includes Cartridge, Fixings and Tap Tails. Built for optimum convenience, it is supplied with Pop-Up Waste and can be used with optional flow regulators to save huge volumes of water.

It functions most effectively with 0.1 bar water pressure and is suitable for all plumbing systems. Crafted from superior material it is in compliance with BS5412 and EN 200 standards and carves itself a special place in any modern bathroom. Use it with a wall-hung basin or a wall-hung vanity unit to give your bathroom a complete makeover.

Key Features

✔Supplied with Pop-up Waste
✔Manufactured using Solid Brass Material
✔Cartridge, Fixings, and Tap Tails Included
✔5-Year Guarantee from Nuie against Manufacturing Defects

Choice of Heights: 105mm and 112mm - [Optional]
It comes in a Chrome Finish
Suitable for Deck-Mounted Installation
Pipe Size: 15mm - 1/2 Inch BSP
Suitable for Low-Pressure Water Systems
Requires a Minimum of 0.1 Bar Water Pressure to Operate
Download the Customer Datasheet And Installation Instruction PDF File from the Additional Info Section
Refer to Technical Drawing for Size Details
Details Of 105mm Height:
Height: 105mm (10.5cm)
Base to Spout: 75mm (7.5cm)
The Centre of the Inlet to the Centre of the Outlet: 120mm (12cm)
Weight: 2.06 Kg
Details Of 112mm Height:
Height: 112mm (11.2cm)
Base to Spout: 70.6mm (7.06cm)
The Centre of the Inlet to the Centre of the Outlet: 125.7mm (12.57cm)
Inlet Centre: 182.3mm (18.23cm)
Weight: 2.15 Kg

Info / Size (mm)

Tap
Pipe Centre: 120 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Beaumont
⤷ Water Activation
: By Rotating
⤷ Handle Position
: Left | Right
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 10 Years
⤷ Material
: Brass
⤷ Theme
: Traditional
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1
⤷ Spout type
: Fixed
⤷ Valve Included
: Yes
⤷ Valve/Cartridge Type
: Screw Down

⤷ Base To Spout
: 75
⤷ Inlet Centres
: 120
⤷ Overall Height
: 105
⤷ Width
: 50
⤷ Inlet Connections
: 1/2 Inch BSP
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Waste Type
: Pop-Up
⤷ Flow Rates (l/min)
: 0.1 bar - 8 | 0.5 bar - 20 | 1 bar - 28 | 2 bar - 36
⤷ Handle Style
: Crosshead
⤷ WRAS Approved
: No
⤷ Waste Included
: Yes
⤷ Barcode
: 5055146102403
⤷ Product Type
: Basin Mixer Taps

Additional Info & Downloads

Download the Customer Data Sheet For 105mm Height Pdf File Download the Customer Data Sheet For 112mm Height Pdf File Download the Installation Instruction Pdf File

Nuie Beaumont Traditional Basin Mixer Tap with Pop-Up Waste - Crosshead Handles - Deck Mounted

£60.69

RRP: ~~£174.00~~

IN-STOCK

Delivery in 4 Working Days Approx.

QS Supplies

2 Features Included In This Product Explained

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Monobloc Tap

A Monobloc/Mono tap has a single control lever that adjusts the mix of hot and cold water supplies and the flow rate. A mixer tap has two separate controls for hot and cold water. Both work equally well, and your choice will come down to aesthetics and how many tap holes your sink has. Monobloc taps are a neater solution and more modern in appearance.

Reviews & Ratings

By: John From : Bexhill-on-Sea Overall Rating: Date: December 19, 2024 Stylish

Easy to fit and clean. The pipes to tap are wider than normal so flow is reduced (still ample to wash with and saves water).

Helpful?

Quality:

Style

Value for Money

Questions & Answers

Submit Your Questions 2 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Debbie Asked :
Will this tap work with the rak Mira inset basin Thanks, Debbie

Answered By QS Team

Please send us the details of your basin without any details we cannot recommend any product.

Was this answer helpful?

Alan Asked :
Hi, I need replacement tap valves for an Ultra Beaumont Mono Basin Mixer Tap With Pop-Up Waste - I345X, do you have any or would it be cheaper to get a new tap?

Answered By QS Team

We do not sell spares; therefore, we would ask you to contact Ultra for replacement tap valves.

Was this answer helpful?