Mira React Wall Mounted Thermostatic Bath Shower Mixer

Mira React Wall Mounted Thermostatic Bath Shower Mixer has a minimalist design with contemporary lines and will streamline your bathrooms functionality. The assortment is fashioned from solid brass and will last you for many years. With a gleaming chrome finish, this bath shower mixer is a great choice that will complement the colour and design of any shower bath. Complete with a shower hose and a handset included.

The product also boasts a horizontally placed valve. It is suitable for wall-mounted installation and operates best with all systems, even at low pressure. Mira Cool Shield™ keeps the valve cool to the touch, while the Thermostatic temperature stability gives added peace of mind. The mixer carries the KIWA UK, WRAS (Water Regulations Advisory Scheme), and TMV2 approvals.

• Manufacturing code of this product: 1.1900.018.
• It comes in a chrome finish.
• Thermostatic temperature stability.
• Fast-fix kit for easy wall-mounted installation.
• Slide bar with adjustable fixing centres 400 - 520 mm (40cm - 52cm).
• A pipe spacer guide included to aid pipework installation during the first fix.
• The front of the tile installation system allows connection to pipework during.
• Second phase fix after tiling is complete.
• Compatible with all systems, even at low pressure.
• Separate flow and temperature controls.
• Temperature control has a maximum temperature stop for increased.
• Safety (with override for a hotter shower).
• Flow control incorporates a diverter to allow easy switch between.
• shower and bath fill.
• One spray 9cm showerhead with rub-clean nozzles.
• 1750mm (175cm) flexible shower hose.
• Inlet connections: 15mm (1.5cm) compression joints with pipes; 3/4 inch BSP connection to a mixer shower.

• Outlet connections: 1/2 inch BSP Male.
• Reversed inlets supported: No - hot left, cold right only.
• Flow rate (at handset): 9 l/min at 0.5 bar.
• Flow rate (at bath outlet): 15 l/min at 0.6 bar.
• Flow regulator: 6 l/min (for handset only, supplied with the product).
• Temperature stability: ± 2°C.
• Factory set to safe max temp: 39°C at maximum temperature stop.
• [Ideal for showering], 46°C using override (ideal for bath fill).
• Adjustable maximum temperature for on-site conditions.
• Cold water range: 1°C to 25°C.
• Hot water range: Min 55°C; 60°C - 65°C (recommended).
• Minimum maintained pressure (gas water heater):.
• 1 bar (10-metre head).
• Minimum maintained pressure (gravity system): 0.1 bar (1-metre head).
• Maximum maintained pressure: 5.0 bar (50-metre head).
• Maximum static pressure: 10.0 bar (100-metre head).
• Refer technical drawing for more details.