Ideal Standard Concept 1700 x 750mm White Asymmetric Idealform Plus Bath| E152501

Ideal Standard Concept E152501 Details

Turn your bathroom into a luxurious, relaxing escape with this Ideal Standard Concept Asymmetric Idealform Plus Bath. The bath features a perfect corner 90-degree angle that can fit into any standard bathroom with a gentle curve along the exposed outer corner that gives it a more appealing look. The product is manufactured out of four layers of high-quality materials that reinforce its strength and give the bath a high-quality appearance. The outer shell of this tub is vacuumed-formed acrylic which is smooth to the touch and luxuriously glossy, easy to clean and resistant to daily wear and tear. The bath is white which allows its use in many different bathrooms.

Available in 2 variations: left/right hand.
It comes in a white finish.
Size [mm]: 1695mm x 745mm x 410mm [Length x Width x Height].
Size [cm]: 169.5cm x 74.5cm x 41cm [Length x Width x Height].
Weight: 36.08 Kg.
Capacity: 187.0 Litres.

Domestic and hotel use.
Part of an extensive range.
Increased strength and rigidity.
Supplied no taphole for maximum flexibility.
Please Note: Bath front panel is not included with the bath [Sold Separately].
Idealform Plus+ - [See Features Explained Section].

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Position of Drain
: Centered Waste
⤷ Range
: Concept
⤷ Bath Type
: Double-Ended
⤷ Interior Shape
: Rounded Rectangular
⤷ External Length
: 1695
⤷ External Width
: 745
⤷ Tub Depth
: 395
⤷ Height Including Feet or Panel
: 560
⤷ Front Panel Included
: Sold Separately
⤷ Colour
: White
⤷ Internal Bottom Length
: 1140
⤷ Internal Bottom Width
: 490
⤷ Height of Rim
: 50
⤷ Distance Tub edge to centre of drain hole
: 240

⤷ Distance Top edge to centre of overflow hole
: 80
⤷ Diameter of overflow hole
: 44
⤷ Rim Width
: 95, 85
⤷ Weight in kg
: 36.02
⤷ Capacity in litres
: 187
⤷ Handed Type
: Left Or Right Hand
⤷ Country of Origin
: EU
⤷ Warranty/Guarantee
: 25 Years
⤷ Material
: Idealform Plus
⤷ No. of Bathers
: 2
⤷ Theme
: Modern
⤷ Waste Included
: Sold Separately
⤷ Barcode
: 5017830533436

Customise Your Product

Front Panel

A suitable front panel to personalise your bath also available as an option below. Please select as per your choice from the option given below

None
OP-145952 - 1700mm Asymmetric Bath Front Panel - E154101 + £274.98

Optional Trap

Space saving trap and waste pipe assembly for use with furniture basin units. Please Note: Image shown is for illustration purpose only.

OP-204193 - Trap 1A½ Plastic P With 75mm Seal + £53.03

Compatible Bath Waste

Bath waste with overflow made using high quality material. Please note image is for illustration purpose only

None
OP-171695 - Luxury Bath Pop-up Waste And Overflow - E1486AA + £162.79

Total: £781.61 5-7 Working Days Approx QS Supplies

4 Features Included In This Product Explained

Encapsulated Base Board

The encapsulated base board has been coated with Glass Reinforced Plastic (GRP) to strengthen it and add a sealing quality to the construction while protecting it from water damage. It goes around the tub and the drain hole, supports the tub, and assists in sealing the underside from moisture.

With / Without Overflow

An overflow is a small hole or opening at the upper part of a sink, basin, bidet or tub that drains away water upon reaching its level so that no water is spilt. When a basin or bath does not come with this design feature, it is called “without overflow” and will need a compatible drain.

Idealform Plus+

Idealform Plus+ provides all the benefits of Idealform, plus with extra reinforcement for peace of mind. Four different layers combine to give these baths exceptional strength and rigidity. The outer shell is vacuumed-formed acrylic which is smooth to the touch and luxuriously glossy, easy to clean and resistant to wear and tear. It is then reinforced with Glass Reinforced Polymer and supported by an 18mm encapsulated baseboard to increase its strength. Finally, the whole bath is coated in an outer colour layer of a Glass Reinforced Polymer resin mix, which creates a more robust bonded product with a smoother surface and added insulating properties to keep the water warmer for longer.

Optional: Front Panel

A front bath panel is a decorative accessory that is used to cover the front-facing side of a bathtub for a neat and polished look. It also conceals plumbing and framework and comes in different sizes, textures and materials.

Ideal Standard Concept 1700 x 750mm White Asymmetric Idealform Plus Bath

MFC Code: E152501

Ideal Standard Concept E152501 Details

Technical Specifications

4 Features Included In This Product Explained

Reviews & Ratings