Bristan Design Utility Lever Easyfit Chrome Kitchen Sink Mixer Tap

Bristan Design DUL SNK EF C Details

Bristan Design Utility Lever Easyfit Kitchen Sink Mixer Tap is a manually controlled unit that adds a high-end finishing touch to any kitchen. A sleek, minimalistic design that requires deck mounted installation, this product is internally constructed from solid material and is beautifully coated in a chrome finish that really shines. A unit that comes with long life and easy to use 1/4 turn ceramic disc valves, it comes with Easy fit base and flexible tails and metal fixing nut for durability. This Easyfit tap is simple to install, and compatible with a host of single and double bowl sinks available separately.

The manufacturing code of this product is DUL SNK EF C.
It comes in a chrome finish.
Long life and easy to use 1/4 turn ceramic disc valves.
Flexible tails included.
Connection Inlet: 1/2 Inch BSP Flexible Tails.
Connection Outlet: Flow Straightener.
Material: Brass.
Height: 380mm - (38cm).

Spout Reach: 220mm - (22cm).
Base to spout: 260mm - (26cm).
Minimum dynamic pressure: 0.4 bar.
Maximum dynamic pressure: 5.0 bar.
Maximum Static Pressure: 10 bar.
Maximum hot water temperature: 65 C.
Requires a minimum of 0.4 bar to a maximum of 5.0 bar of water pressure.
Refer to the technical diagram for the complete technical dimension.

Info / Size (mm)

Taps
Pipe Center: 220 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Lifting/Tilting
⤷ Range
: Design Utility
⤷ Handle Position
: Left & Right
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 10 Years
⤷ Theme
: Modern
⤷ Installation Type
: Deck-Mounted
⤷ No. of Holes Required
: 1

⤷ Base To Spout
: 260
⤷ Spout Reach
: 220
⤷ Overall Height
: 380
⤷ Minimum Operating Pressure (Bar)
: 0.4
⤷ Handle Style
: Lever
⤷ WRAS Approved
: Yes
⤷ Barcode
: 5014868027364
⤷ Product Type
: Sink Mixer Tap
⤷ Tails
: Flexible Tails

Total: £120.90 2 Working Days Approx QS Supplies

5 Features Included In This Product Explained

Luminance Chrome

It is a hard-wearing chrome plating which is salt-tested and scratch-proof for durable, long-lasting use.

Precise Glide

It comes incorporated with ceramic cartridges for long life with precise control for smooth, leak-free use.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.

Quick Change

The product can be simply removed and another one fixed in its place. All you need to do is turn off the water supply.