Reina Nevah 295mm High Single Panel Steel Designer Radiator

Reina Nevah RND-NVH210SW Details

Cosy up your space by bringing home the modern design Nevah Steel Designer Radiator from Reina. The radiator is made out of strong stainless steel that is resistant to wear and tear with time and is given your choice of white or anthracite finishes to best fit into your existing decor. It measures 295 millimetres in height and can be purchased in the width you prefer, from 1000 millimetres, 1200 millimetres or 1400 millimetres in size. The unit is designed for use with central heating systems only and comes with both an air vent and an end plug.

Key Features

✔Choice of different finishes: White and Anthracite - [Optional]
✔Manufactured using steel material
✔Supplied with Air vent and End plug
✔Five years guarantee from Reina against manufacturing defects

Available in different widths: 1000mm, 1200mm and 1400mm - [Optional].
Height: 295mm (29.5cm).
Wall to pipe centres: 47mm (4.7cm).
Distance from wall: 88mm (8.8cm).
Suitable for central heating systems only.
EN 442 compliant product.

Brackets for radiator included.
Valves, Sleeving kit and chrome pipe kit [Optional].
For BTU and Watts, Please refer to the Product Variations Info and MFC Code section.
The valves shown in the image are not included.
Refer to the technical diagram for complete technical dimensions.

Radiator Calculator

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Nevah
⤷ Colour
: White
⤷ Country of Origin
: Turkey
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Stainless Steel
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Width
: 1000
⤷ Height
: 295

⤷ Orientation
: Horizontal
⤷ Barcode
: 5057199904348
⤷ BTU Output
: 70°C - 1792
⤷ Watts
: 70°C - 526
⤷ Valves Included
: Sold Separately
⤷ Fuel Type
: Central Heating
⤷ Wall to Centre of Inlet
: 47
⤷ Panel Configuration
: Single

Technical Images

Reina Nevah 295mm High Single Panel Steel Designer Radiator

Customise Your Product

Optional Accessories

Reina provides optional accessories that you may require for the installation. The manufacturer highly recommends these Accessories. Please Note: The image shown is for illustration purpose only.

No Option Selected
OP-113634 - 200mm Chrome Pipe Kit + £14.14

Total: £95.82 5 Working Days Approx QS Supplies

Product Variations Info & MFC Code

Width	1000mm	1200mm	1400mm
Tube Qty	5	5	5
Pipe Centres	955mm	1155mm	1355mm
Wall To Pipe Centres	67-82mm	67-82mm	67-82mm
Wall Distance	107-122mm	107-122mm	107-122mm
Watts - Delta-70	526	619	716
BTU - Delta-70	1792	2110	2441
BTU - Delta-60	1469	1730	2001
BTU - Delta-50	1156	1361	1575
BTU - Delta-45	1007	1185	1371
BTU - Delta-40	870	1024	1185
BTU - Delta-35	728	858	992
BTU - Delta-30	591	696	806
BTU - Delta-25	230	271	314
White	RND-NVH210SW	RND-NVH212SW	RND-NVH214SW
Anthracite	RND-NVH210SA	RND-NVH212SA	RND-NVH214SA

4 Features Included In This Product Explained

Central Heating

'Standard' radiators and towel warmers are connected to your central heating system, so hot water flows through them to heat them.
Read more...

BTU Output

It is the short form of a British thermal unit (BTU or Btu) and is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It is a standard unit against which radiator efficiency is measured.
Read more...

Air Vent

An air vent or a radiator air valve or bleed valve, is a small part of the radiator. Its role is to release trapped air or gases from inside the radiator, keeping the appliance heating efficiently and evenly. An Air vent can be an automatic air vent or manually opened to release air and are made of metal or plastic.

Optional Sleeving Kit

A sleeving kit in a radiator heating system are components or materials used to sleeve or insulate the pipes or tubes that circulate hot water or steam from the central heating source to the radiators or heating units. The sleeving kit provides thermal insulation and prevents heat loss, adding to the heating systems efficiency.