Mira Jump 10.8kW Multi-Fit Electric Shower White-Chrome

Mira Jump 1.1788.012 Details

Manufacturing code of this product is 1.1788.012.
It comes in a white and chrome finish.
Watts: 10.8kW.
Pressure stabilised temperature control.
Push-button on/off.
Supplied with four sprays of 90mm (9cm) showerhead with rub-clean nozzles.
Dual terminal blocks.
The adjustable slide bar fits over the holes left by the previous shower kit.
Supply voltage: 230v ± 10%.
Terminal Block connections: Maximum 16mm² (1.6cm²).
Water entry points: Left or right (rising, falling & rear).
Cable entry points: Left or right (rising, falling & rear).
Inlet connections: 15mm (1.5cm) plastic stub, compression or push-ft fittings.

Outlet connections: ½" BSP Male.
Temperature stability: ± 6°C.
Power options: 240V AC.
Supply rating: 45 amp.
Minimum maintained pressure: 1.0 bar (10-meter head).
Maximum maintained pressure: 5.0 bar (50-meter head).
Maximum static pressure: 10.0 bar (100-meter head).
BEAB approved.
Energy Efficiency: Class A.
Refer to the technical drawing for more size details.
Download the installation instruction PDF from the Additional Info section.
Two-year warranty from the manufacturer against manufacturing defects.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: White And Chrome
⤷ Country of Origin
: UK
⤷ Warranty/Guarantee
: 2 Years
⤷ Inlet Connections
: 15mm
⤷ Water Saving
: Yes
⤷ Spray Pattern
: 4
⤷ Outlet Connection
: 1/2" BSP Male
⤷ Compliance/Approvals/Standard
: BEAB
⤷ Product Type
: Electric shower

⤷ Temperature Control
: Stabilised
⤷ Plumbing System Compatibility
: Cold Mains
⤷ KW Rating
: 10.8
⤷ Voltage
: 230v ± 10%
⤷ Separate temperature and power controls
: Yes
⤷ Push button power selector
: Yes
⤷ Water Entry Points
: Left or right
⤷ Cable Entry Points
: Left or right
⤷ Maximum Static Pressure
: 10.0 bar

Additional Info & Downloads

Download the Installation Instructions And User Guide Pdf File

Total: £197.90 2-3 Working Days Approx QS Supplies

2 Features Included In This Product Explained

Mains-Operated

Mains-operated devices work on electricity by plugging into electrical wall sockets. These require higher electrical energy and can't be operated using batteries as small batteries can't power the device. Large, non-portable electrical appliances are typically mains operated.

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.