Reina Camden Chrome and White Traditional Towel Radiator, Steel

Reina Camden Details

MFC: RND-CM01

The Reina Camden Traditional Radiator looks and feels like a radiator. There's no mistaking its classy, stylish yet conventional appearance. It is made of steel, and although it comes across as being fragile, it is quite sturdy inbuilt. This appliance comes in an imperial white finish that oozes a sense of lavishness. Alternatively, it is also available in a white finish. You can be the proud owner of this fantastic-looking heating appliance at a reduced price. Without even trying, it becomes the focal point of your room, around which many a coffee and conversation is shared. To top it all, this fixture comes with a 5-year guarantee from the manufacturer.

Key Features

✔EN 442 Compliant Product
✔Brackets for Radiator Included
✔Manufactured using Steel Material
✔Supplied with Air Vent and End Plug

Choice of Widths: 680mm and 770mm
It Comes in a Chrome and White Finish
Suitable for Central Heating Systems Only
Height: 508mm [50.8cm]
Distance from Wall: 260mm [26cm]
Wall to Pipe Centres: 50mm [5cm]
Inlet Connection: G 1/2 Inch
Valves, Sleeving Kit and Chrome Pipe Kit - [Optional]
For BTU and Watts, Please Refer to the Chart in the PRODUCT VARIATIONS INFO and MFC CODE section
Refer to the Technical Drawing for More Details
5-Year Guarantee from Reina Against Manufacturing Defects
The Valves Shown in the Image are not Included

Radiator Calculator

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Camden
⤷ Colour
: Chrome And White
⤷ Shape
: Straight
⤷ Country of Origin
: Turkey
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Steel
⤷ Installation Type
: Wall Mounted
⤷ Projection (Depth)
: 230
⤷ Width
: 680
⤷ Height
: 508

⤷ Fixings included
: Yes
⤷ Orientation
: Horizontal
⤷ Barcode
: 5081304259764
⤷ BTU Output
: 60°C - 1989
⤷ Watts
: 60°C - 583
⤷ Tapping / Pipe Centres
: 680
⤷ Valves Included
: Sold Separately
⤷ Fuel Type
: Central Heating
⤷ Wall to Centre of Inlet
: 50

Add-Ons

Optional Accessories

Reina provides optional accessories that you may require for the installation. The manufacturer highly recommends these Accessories. Please Note: The image shown is for illustration purpose only.

No Option Selected
OP-243458 - 200mm Chrome Pipe Kit + £16.40
OP-243459 - 130mm Chrome Pipe Kit + £20.84

Reina Camden Chrome and White Traditional Towel Radiator 580mm High - Steel

£232.00

RRP: ~~£420.00~~

IN-STOCK

Delivery in 4 Working Days Approx.

QS Supplies

Product Variations Info & MFC Code

Width	680mm	770mm
Fuel Type	Central Heating	Central Heating
Finish	Chrome-White	Chrome-White
Height	508mmm	508mmm
Pipe Centre	680mm	770mm
Wall To Pipe Centre	50mm	50mm
Wall Distance	260mm	260mm
BTU-Delta-60	1989	2470
Watts - Delta-60	583	724
MFC Code	RND-CM01	RND-CM02

5 Features Included In This Product Explained

BTU Output

It is the short form of a British thermal unit (BTU or Btu) and is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It is a standard unit against which radiator efficiency is measured.
Read more...

Accordance With EN 442

This European Standard defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors fed with water or steam systems at temperatures lower than 120 degrees celsius from a remote energy source.

Air Vent

An air vent or a radiator air valve or bleed valve, is a small part of the radiator. Its role is to release trapped air or gases from inside the radiator, keeping the appliance heating efficiently and evenly. An Air vent can be an automatic air vent or manually opened to release air and are made of metal or plastic.

Optional: Radiator Valve

Radiator valves help control how much hot water enters and leave it, and the flow of water controls how much heat the radiator generates. These are usually found at the radiator's bottom left, and right corners, where the water pipes enter and exit, or can also be present at the bottom near the centre.
Read more...

Optional Sleeving Kit

A sleeving kit in a radiator heating system are components or materials used to sleeve or insulate the pipes or tubes that circulate hot water or steam from the central heating source to the radiators or heating units. The sleeving kit provides thermal insulation and prevents heat loss, adding to the heating systems efficiency.

Questions & Answers

Submit Your Questions 3 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Gavin Asked :
I'm wondering about the valve fittings on this radiator if you can help? The technical diagram suggests they need to come off the lower pipes' sides; however, this image on the Reina Instagram page https://scontent-lhr3-1.cdninstagram.com/vp/d83969964a89c6c61a79aa81925436e3/5D65D554/t51.2885-15/e35/47689789_314821229382608_4390271580881238025_n.jpg?_nc_ht=scontent-lhr3-1.cdninstagram.com suggests the valves can come off the front? Thanks

Answered By QS Team

The photograph doesn't show the valve positions very well. It is better in our stock brochure. They do fit the sides of the radiator from the lower pipes as you have mentioned.

Was this answer helpful?

Angeline Asked :
Hi, Although this is wall-mounted, can the heat supply come up out of the floor below? (and would I purchase angled valves?) I know some of these radiators have to have the supply behind the product chased into the wall. It's going on an outer wall; therefore, my supply will come up out the bathroom floor and not chased into a wall. Many thanks.

Answered By QS Team

For this radiator, it doesn’t matter where the pipes come from. However, the valves have to be ordered to suit where the pipes are coming from.

Was this answer helpful?