Crosswater Flow Dual Lever Deck Mounted Chrome Bath Filler Tap

Crosswater Flow MBFW322D Details

The simple yet striking Bath Filler Tap from Flow range of Crosswater is all set to rock your bathing experience. The sensational chrome finish and easy-to-use levers, make this dual lever, deck mounted bath filler a gleeful addition at any bath top. The incorporation of quarter-turn ceramic disc and robust brass body adds durability to this ravishing bath filler tap. With 12 months of guarantee on ceramic disc cartridge and a 5 year guarantee on tap from Lauren, you can care-freely enjoy thrilling baths for years.

It comes in a chrome finish.
Size In [mm]: Width 230mm x Depth 140mm x Height 130mm.
Size In [cm]: Width 23cm x Depth 14cm x Height 13cm.
Centre of inlet to centre of outlet: 105mm - (10.5cm).
Inlet centres: 180mm - (18cm).
The minimum flow rate is 17.7 litres per minute at 0.1 bar water pressure.
The inlet connection is G3/4 inch male tail.

Suitable for all types of plumbing systems.
It should be cleaned using warm soapy water and polished with a clean, soft, dry cloth.
Five years of guarantee from the manufacturer against any manufacturing defects [does not cover damage during fitting or misuse] and 12 months for ceramic disc headwork.
The manufacturing code is MBFW322D.
For complete size details, please refer technical drawing.
Download Installation Instruction PDF File From The Additional Info Section.

Info / Size (mm)

Tap
Pipe Centre: 180 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Rotating
⤷ Range
: Flow
⤷ Handle Position
: Left & Right
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5-Years
⤷ Material
: Brass
⤷ Theme
: Modern
⤷ Installation Type
: Deck-Mounted
⤷ No. of Holes Required
: 2
⤷ Valve Included
: Yes
⤷ Valve/Cartridge Type
: Ceramic Disc
⤷ Handle Material
: Zinc Cast

⤷ Base To Spout
: 73
⤷ Spout Reach
: 105
⤷ Inlet Centres
: 180
⤷ Overall Height
: 130
⤷ Width
: 230
⤷ Spout Deck Mount Drill Hole Diameter
: 30
⤷ Max. Deck Thickness
: 50
⤷ Inlet Connections
: 3/4 Inch
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 17.7
⤷ Handle Style
: Lever
⤷ WRAS Approved
: Yes

Additional Info & Downloads

Download the Installation Guide Pdf File

Total: £139.00 2 Working Days Approx QS Supplies

1 Features Included In This Product Explained

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...