Submit Your Questions 6 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Ralph Asked :
Hi, these taps state that they are suitable for low-pressure; however, my plumber says they are only suitable for high-pressure s. Can you please explain which is correct?
As per the manufacturers' details, the operating water pressure required is 0.1 bar, which is Suitable for a low-pressure water system.
Peter Asked :
Please confirm where the spout is positioned - to the left or right of the lever. Your photos show it is positioned to the lever's left and right.
It can be positioned on either the left or right as it is a reversible product.
Graham Asked :
What is the flow rate of the Hudson Reed Mode Wall Mounted Basin And Bath Filler Tap QS-V22519?
Flow Rates (Litres Per Min): 0.1bar - 3.5, 0.5bar - 8, 1.0bar - 12, 2.0bar - 17 and 3.0bar - 20.5
John Asked :
Hi, Could you tell me where the hot and cold supplies connected to this tap? Thanks
Hi, please refer this URL for Installation & operating guide (https://images.alt.qssupplies.co.uk/2018-1-9--12-20-10-692.pdf)
Kirsty Asked :
Can you please let me know the measurements for the back of the taps? i.e. how much they will go back into the wall? Thank you
Thank you for your enquiry. Space is about 100mm as you have two Flexi tails from spout to tap, but you can use a copper pipe, not supplied by us. I hope this helps.
Catherine Asked :
Hi. What is the projection of this tap? Thanks
The projection is 213mm. I hope this helps.
We will soon verify the details and add your rating appropriately.