Nuie Windon Deck Mounted High-Rise Mono Basin Mixer Tap

Nuie Windon WIN370 Details

Nuie Windon Deck Mounted High-Rise Mono Basin Mixer Tap is a wonderful accessory to enhance the appearance and efficiency of your basin. This mixer is built from high quality brass for long term performance. It comes in chrome, matt black or brushed brass finish that will retain its look for a long time. It is suitable for the low-pressure system and incorporates ceramic disc technology that provides smooth operation and long life. Tap tails and cartridge are included in the design and gels well with countertop vessel basins.

Size [mm]: 52mm x 195.5mm x 290mm [Width x Depth x Height].
Size [cm]: 5.2cm x 19.55cm x 29cm [Width x Depth x Height].
Centre of the inlet to centre of outlet: 150mm (15cm).
Suitable for low-pressure water system.
A minimum of 0.2 bar of water pressure required.
Flow Rate (l/min): 0.1 Bar - 2.2, 0.5 Bar - 7.5, 1 Bar - 11.2, 2 Bar - 16.4, 3 Bar - 20.2.
Base to spout: 243mm (24.3cm).
Single lever cartridge type.
Suitable for deck-mounted installation.

Excellent flow rates, even at low pressure.
Stunning contemporary angular design.
Pipe size: 1/2".
Cartridge material: Plastic.
Supplied with fixing and mounting hardware.
WRAS approved product.
The sleek high-rise design makes the tap perfect for use with countertop vessel basins.
Refer to the technical drawing for more details.
Download the Technical data sheet and Installation instruction PDF from the Additional Info section.

Info / Size (mm)

Tap
Pipe Centre: 150 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Tap Body Shape
: Round
⤷ Handle Position
: Upward
⤷ Range
: Windon
⤷ Water Activation
: By Lifting | Tilting
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Brass
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1
⤷ Spout type
: Fixed
⤷ Valve Included
: Yes

⤷ Valve/Cartridge Type
: Ceramic Disc Cartridge
⤷ Base To Spout
: 243
⤷ Spout Reach
: 150
⤷ Overall Height
: 290
⤷ Width
: 52
⤷ Inlet Connections
: 1/2 Inch
⤷ Minimum Operating Pressure (Bar)
: 0.2
⤷ Flow Rates (l/min)
: 0.1 bar - 2.2 | 0.5 bar - 7.5 | 1 bar - 11.2 | 2 bar - 16.4 | 3 bar - 20.2
⤷ Handle Style
: Lever
⤷ Barcode
: 5056211898207
⤷ Product Type
: Basin Mixer Tap

Additional Info & Downloads

Download the Technical Data Sheet Pdf File Download the Installation Instructions Pdf File

Total: £78.77 2 Working Days Approx QS Supplies

4 Features Included In This Product Explained

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Monobloc Tap

A Monobloc/Mono tap has a single control lever that adjusts the mix of hot and cold water supplies and the flow rate. A mixer tap has two separate controls for hot and cold water. Both work equally well, and your choice will come down to aesthetics and how many tap holes your sink has. Monobloc taps are a neater solution and more modern in appearance.