Mira Relate ERD Thermostatic Mixer Shower Chrome

Mira Relate ERD Thermostatic Mixer Shower works with a wide range of bathrooms in all plumbing systems. It requires a minimum 0.1 bar of water pressure and a maximum of 0.5 bar for the proper functionality of the unit. A chic and stylish unit from top to bottom; this product is thermostatic and offers separate flow and temperature controls. It also features Mira Cool Shield™ to ensure the valve does not get hot during showering. It is backed with five years of warranty from the manufacturer against any manufacturing defects.

• The manufacturing code of this product is 2.1878.002.
• It comes in a chrome finish.
• Control Type: Thermostatic.
• Feature maximum temperature stop for increased safety.
• Mira Cool Shield to ensure the valve doesn't get hot during showering.
• 90mm (9cm) single spray hand shower with rub-clean nozzles included.
• Supplied with a large 200mm (20cm) deluge showerhead.
• Water entry points: rear only.
• Inlet connections: 1/2 inch BSP to pipework, 3/4 inch BSP to shower unit.
• Outlet connections: 1/2 inch BSP Male.
• Adjustable pipe centres: 150mm (15cm) ± 24mm (2.4cm).
• Reversed inlets supported: No = hot left, cold right only.

• Cold water range: Up to 25 deg.C.
• Desirable water range: 60 deg.C - 65 deg.C.
• Suitable for all plumbing system.
• Minimum maintained pressure: 0.1 bar (1-meter head).
• Maximum maintained pressure: 5.0 bar (50-meter head).
• Maximum static pressure: 10.0 bar (100-meter head).
• Flow rate (at handset): 10.2 l/min at 0.5 bar.
• Temperature stability: ± two deg.C.
• Automatic shutdown: Shutdown within 2 secs.
• Factory set to safe max temp: Factory set to 41 deg.C.
• Adjustable maximum temperature for on-site conditions.
• Refer to the technical drawing for more size details.