Hudson Reed Reign Rectangle Triple Thermostatic Concealed Shower Valve Chrome

Hudson Reed Reign REI3611 Details

Begin an exciting day or end a successful day with a refreshingly warm shower by installing this Hudson Reed Reign Triple Thermostatic Concealed Shower Valve. Backed by a solid 20 years manufacturer guarantee against any manufacturing defects, this thermostatic concealed shower valve is made from high quality brass and finished in appealing chrome finish. This shower valve comes with Anti-Scald mechanism to protect your family against scalding due to suddenly hot or cold water shut off. If the hot and cold water supplies are the wrong way around, you need to remove the cartridge, turn 180° and replace.

Available With or Without Diverter - [Optional].
Size [mm] of backplate: 120mm x 135mm x 280mm [Width x Depth x Height].
Size [cm] of backplate: 12cm x 13.5cm x 28cm [Width x Depth x Height].
Wall cavity required: 67mm (6.7cm).
It comes in a chrome finish.
Minimalist sleek design.
Backplate shape: Rectangular.
Handle design: Lever and Round.
Number of handles: 3.
It can be installed vertically or horizontally.
Mount Type: Wall/ Recessed.
Pipe size: without diverter 15mm (1.5cm) and With diverter 22mm (2.2cm).
Pipe centre: 125mm (12.5cm).
Manufactured using the latest technique of thermostat.
Valves are thermostatically controlled using a Valquest patented cartridge.

Accurate flow control with excellent flow rate even at low pressure.
Suitable for medium water pressure system.
Required minimum 0.5 bar water pressure for smooth working.
Thermostatic control to +/- 2°C even if the water pressure fluctuates.
Complete thermal protection to prevent scalding in the event of hot or cold water shut off.
In the event of hot or cold water failure, the valve will shut down as per the relevant standard.
The patented cartridge is highly resistant to calcium buildup - even in hard water areas.
The cartridge is fully reversible; meaning doesn't need re-plumbing if hot and cold supplies are the wrong way around it.
Suitable for all plumbing systems - gravity-fed pumped unvented high pressure or fully modulated combi-boilers.
TMV2 approval no.: BC1875/0817.
TMV3 approval no.: BC1119/1212.
WRAS approval no.: 1703023.
For complete size details, please refer to technical drawing.
Download the Fitting Instruction and Data Sheet for shower valves PDF File from the Additional Info Section.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Shape
: Rectangular
⤷ Warranty/Guarantee
: 20 Years
⤷ Material
: Brass/ABS
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Min-Max Wall Mount
: 67
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 5.5, 0.5 bar - 14, 1 bar - 20, 2 bar - 29, 3 bar - 44
⤷ Handle Style
: Lever, Round
⤷ WRAS Approved
: Yes
⤷ Depth
: 135

⤷ Temperature Control
: Thermostatic
⤷ Backplate Width
: 120
⤷ Backplate Height
: 280
⤷ Anti-Scald
: Yes
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 3
⤷ Orientation
: Landscape, Portrait
⤷ Plumbing System Compatibility
: All
⤷ Plumbing Option
: Concealed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc

Additional Info & Downloads

Download the Fitting Instructions Pdf File Download the DataSheet For Shower Valves Pdf File

Total: £194.53 2 Working Days Approx QS Supplies

Other Sizes / Finishes

Other Sizes / Finishes / Variations Available.

QS Code	Finish	Size / Difference	MFC Code
QS-V58529	-	Round Rectangular Back Plate	REI3411

Back to QS-V90228 / MFC Code: REI3611

6 Features Included In This Product Explained

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Medium Water Pressure

Water systems operating at a pressure between 0.5 and 0.9 bar are considered medium pressure. Products usually come labelled if they are suitable for use in medium pressure.

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Hudson Reed Reign Rectangle Triple Thermostatic Concealed Shower Valve Chrome

MFC Code: REI3611

Hudson Reed Reign REI3611 Details

Technical Specifications

Additional Info & Downloads

6 Features Included In This Product Explained

Reviews & Ratings