Reina Colona Vertical 2 Column Traditional Radiator 1800mm High, Mild Steel

Reina Colona Details

MFC: 2/C184

Meta DescriptionThe Reina Colona 2 Column Radiator is a wonderful amalgam of classic elegance and contemporary craftsmanship. It features vertical tubes for quick and efficient heating, ideal for narrow spaces and high ceilings. This wall-mounted fixture with an impressive heat output is compatible with central heating systems. It can be used in every room in your house, including your living room, bedroom or kitchen. If you want to upgrade to a new radiator that looks good but is also high performing, then this piece is perfect for your home.

Key Features

✔Brackets for Radiator Included
✔Supplied with Air Vent and End Plug
✔Manufactured using Mild Steel Material
✔5-Year Guarantee from Reina Against Manufacturing Defects

Choice of Finishes: White, Laquer - Raw Material and Anthracite
Choice of Widths: 200mm, 290mm and 380mm
Suitable for Central Heating Systems Only
Height: 1800mm [180cm]
Wall to Pipe Centres: 66mm [6.6cm]
Distance from Wall: 98mm [9.8cm]
Brackets for Radiator Included
EN 442 Compliant Product
The Image Shown is for Illustration Purposes Only
For BTU and Watts, Please Refer to the Chart in the PRODUCT VARIATIONS INFO and MFC CODE section
Valves and Insertable Feet - [Optional]
Refer to the Technical Diagram for Complete Technical Details
The Valves Shown in the Image are not Included

Radiator Calculator

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Colona
⤷ Colour
: White
⤷ Country of Origin
: Turkey
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Steel
⤷ Installation Type
: Floor Standing
⤷ Width
: 200
⤷ Height
: 1800
⤷ Orientation
: Vertical
⤷ Barcode
: 5081304262214

⤷ BTU Output
: 60°C - 2165
⤷ Watts
: 60°C - 635
⤷ No. Of Bars
: 4
⤷ Tapping / Pipe Centres
: 200
⤷ Valves Included
: Sold Separately
⤷ Fuel Type
: Central Heating
⤷ Wall to Centre of Inlet
: 66
⤷ Brackets Included
: Yes
⤷ No. of Columns
: 2

Technical Images

Reina Colona Vertical 2 Column Traditional Radiator 1800mm High - Mild Steel

£108.00

RRP: ~~£192.96~~

IN-STOCK

Delivery in 4 Working Days Approx.

QS Supplies

Product Variations Info & MFC Code

Width	200mm	290mm	380mm
Height	1800mm	1800mm	1800mm
Fuel	Central Heating	Central Heating	Central Heating
Pipe Centres	200mm	290mm	380mm
Wall To Pipe Centre	66mm	66mm	66mm
Wall Distance	98mm	98mm	98mm
Tube Quantity	4	6	8
BTU-Delta-60	2165	3245	4330
Watts - Delta-60	635	952	1270
White MFC	2/C184	2/C186	2/C188
Anthracite MFC	2/C184A	2/C186A	2/C188A
Laquer - Raw Material MFC	-	2/C186L	2/C188L

5 Features Included In This Product Explained

Mild Steel

Mild Steel is the most common radiator material. It is inexpensive, available in a variety of designs and finishes, lightweight and durable.

BTU Output

It is the short form of a British thermal unit (BTU or Btu) and is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It is a standard unit against which radiator efficiency is measured.
Read more...

Air Vent

An air vent or a radiator air valve or bleed valve, is a small part of the radiator. Its role is to release trapped air or gases from inside the radiator, keeping the appliance heating efficiently and evenly. An Air vent can be an automatic air vent or manually opened to release air and are made of metal or plastic.

Accordance With EN 442

This European Standard defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors fed with water or steam systems at temperatures lower than 120 degrees celsius from a remote energy source.

Optional: Radiator Valve

Radiator valves help control how much hot water enters and leave it, and the flow of water controls how much heat the radiator generates. These are usually found at the radiator's bottom left, and right corners, where the water pipes enter and exit, or can also be present at the bottom near the centre.
Read more...