Crosswater Drift Mono Tall Basin Mixer Tap With Click Clack Waste

Crosswater Drift Mono Tall Basin Mixer Tap With Click Clack Waste draws attention to itself and the Basin. The mixer has a lovely tall profile that works well with a vessel or countertop basin with its deck-mounted installation. It incorporates a ceramic disc cartridge for efficient internal working. It is moulded in a stunning, simple design using high-quality brass and is attractively finished.

Our customers love its stylish elongated spout, which makes it stand out from the standard height taps and gives easier access to the water flowing out. The three finish choices allow its inclusion into a host of modern decors. It will ensure excellent performance in low and high-water-pressure systems as it has been carefully built to make it easy for you.

• Features ceramic disc cartridges, which provide smooth operation and excellent durability.
• Designed to work with above-counter basins or vessel sinks that sit higher than traditional recessed basins.
• 25mm Single lever ceramic cartridge.
• Size In [mm]: 38mm x 182mm x 250mm [Width x Depth x Height].
• Size In [cm]: 3.8cm x 18.2cm x 25cm [Width x Depth x Height].
• Base to spout: 192mm - (19.2cm).
• Centre of the inlet to centre of outlet: 139mm - (13.9cm).
• Suitable for low and high water pressure systems.

• Required minimum 0.3 bar to maximum 5.0 bar.
• Maximum static pressure: 10.0 Bar.
• The taller spout allows for easier access to the water flow.
• The design allows for easy mixing of hot and cold water to achieve the desired temperature.
• Moving the handle up or down adjusts the flow rate while moving it left or right adjusts the temperature mix.
• Requiring a single mounting hole makes it easier to install compared to taps that require separate holes for hot and cold water controls.
• Refer to the technical diagram for complete technical dimensions.
• Download the installation instruction PDF from our additional info section.