Bristan Inox 1.0 Easyfit Stainless Steel Kitchen Sink With Raspberry Tap

Bristan Inox SK INXRD1 SU RSP Details

The Bristan Inox 1.0 Easyfit Kitchen Sink with Raspberry Tap is a truly stylish kitchen set-up that features a 0.6mm gauge, 304 grade 18/8 stainless-steel crafted sink and high-quality brass-bodied, chrome-finished tap on top. Suitable for all plumbing systems, this unit offers a drainage flow rate of approximately 39.2 litres per minute and tap requires a minimum of 0.3 bar to a maximum of 5 bar of water pressure for proper functionality. Complete with one taphole, this product also comes fitted with an Easyfit tap base, flexible inlet pipes and isolators.

Manufacturing code of this product: SK INXRD1 SU RSP.
Features Of Sink:.
It comes in a fabulous stainless steel finish.
Size in [mm]: 860mm x 500mm x 160mm [Length x Width x Height].
Size in [cm]: 86cm x 50cm x 16cm [Length x Width x Height].
Minimum cabinet width: 500mm - (50cm).
Incorporates with one taphole.
Connection Inlet: 1/2 inch BSP Flexible Tails.
Connection Outlet: G1 1/2 inch.
Drainage Flow Rate: 39.2 (litres per minute).
Made to last: 0.6mm gauge, 304 grade 18/8 stainless steel for stain, corrosion and rust resistance.
Includes cutting-hole template.
Download the Installation Instruction PDF File From The Additional Info Section.
Refer to the technical diagram for complete technical dimensions.
Features Of Tap:.

It comes in a chrome finish.
Height: 295mm - (29.5cm).
Centre of the inlet to centre of outlet: 190mm - (19cm).
Contemporary and stylish design.
Constructed using high-quality brass.
Valve/Cartridge Type: 35mm cartridge.
Suitable for low water pressure.
Required minimum 0.3 bar to maximum 5.0 bar water pressure.
Inlet connections: 1/2 inch BSP flexible tails.
Suitable for all plumbing systems.
Maximum hot water temperature: 65°c.
Maximum static pressure: 10 bar.
Flow type: Single flow.
Long-life ceramic cartridge for added durability and ease of use.
Metal fixing nut for added durability.

Info / Size (mm)

Sink
Length: 860 mm
Width: 500 mm

Tap
Pipe Centre: 190 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Stainless Steel
⤷ Overall Length
: 860
⤷ Overall Width
: 500
⤷ Length of Main Bowl
: 350
⤷ Width of Main Bowl
: 400
⤷ Depth of Main Bowl
: 165
⤷ Material
: Stainless Steel

⤷ Gauge / Thickness
: 0.6
⤷ Tap Included
: Yes
⤷ Waste Included
: Yes
⤷ Waste Type
: Strainer Waste
⤷ No. of Tap Holes
: 1
⤷ Fixings included
: Yes
⤷ Warranty/Guarantee
: 25 Years Of Sink, 5 Years Of Easyfir Base, 5 Years Of Tap

Additional Info & Downloads

Download the Installation Instructions Pdf File

Total: £159.14 2 Working Days Approx QS Supplies

2 Features Included In This Product Explained

Secure Fix

The design features metal fixings that secure your tap, preventing any movement or rotation during use.

Easyfit

Step1: Fitting the Base The first step is to slot the base of the tap into the sink. For this, detach the plain barrel from the EasyFit Base. Unscrew the fitting and push it through the hole in the sink or work surface. It must be in the central position, indicated by the word FRONT facing forward. Now tighten the fitting to the surface with a hex key, and replace the plain barrel. Step 2: Fitting the Tails Next, you need to connect the integral flexible tails to the hot and cold water sources after you have closed the built-in valves. Step 3: Fitting the Tap Body Push and secure the tap body to the base using grub screws, which are present on either side of the tap body. The grub screws must be tightened using the hex key.