Menu
Rate this Item.:
I decided to go for the 750mm bath instead of the standard 700mm, what a big difference it makes. I have two kids, 1 & 3 years old. They fit in the bath together nicely and with a lot of room to manoeuvre. As a shower, the width is as good as a shower bath, very simple, easy to clean. Usually Kaldewei quality as expected. Happy!
A good looking bath and seemed fairly straight forward to fit - the fitters had no problems. It is not that easy to clean, although new, so perfectly smooth surface. If I knew I probably would have gone for the 'easy-to-clean' coating, but expected no problem. My old pitted one was far easier, but this is prettier!
2 of 2 People have found this Review useful
This is a fabulous bath for a fairly small bathroom feels spacious and comfortable. The minimalist look is clean and modern. It feels very stable too absolutely no movement. We are delighted with it and would certainly recommend.
Love this bath... so easy to clean and always looks sparkly and clean as well as holding the heat of the bathwater really well. Not one single small little niggle or complaint here!
I recently installed this bath for a client and it is a very good quality bath and looks great in the new bathroom. It is well priced, well made and looks great.
Pleased with bath; extra width makes it more comfortable. Holds heat well. Website easy to use but customer service not up to much.
Submit Your Questions 7 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Steve Asked :If I order the bath with the tap holes pre-drilled, could you just confirm that the holes will be waste/plug end? Also, what would the distance between the holes be?
We offer two standard tap holes drilled at the foot end of the bath. The distance between tap holes is 180mm from centre to centre. The diameter of the tap holes is 35mm.
Nicky Asked :Hi, Can the tap holes be cut afterwards? Are they standard sizes?
Yes, it is possible, but there is a risk of damaging the bath when trying to drill the tap holes after manufacture, and this invalidates the guarantee around that area of the bath. We also drill the holes before enamelling, so the steel is not exposed. Drilling after enamelling leaves the steel exposed, so it must be sealed to avoid rusting/oxidisation.
Alan Asked :The Kaldewei Saniform Plus 373 -1 Steel Bath 1700 x 750 shows a 2 Tap Hole option. Can you please let me know the cost for this predrilled and the subsequent delivery time from order? Many thanks
The manufacturer supplies Pre-Drilled tap holes baths without any additional cost. If you order the only a bath without variants (EasyClean, Anti-Slip, Full Anti-slip) the lead time is 3-5 working days. But if Variants are selected, then it is a special order where the lead time is 3-5 weeks.
Katie Asked :Is this available in a non-slip finish? I cannot see where to add this, and what cost? An easy to clean finish is mentioned in the comments - is this the same as above? Thanks Kate
Unfortunately, anti-slip cannot be added to this bath.
SB Asked :Hello Is it possible to have tap holes drilled in the 1700 x 750 bath? Thank you
This bath is available in 2 version - 0 tap hole and 2 taphole. For 2 taphole bath please refer https://www.qssupplies.co.uk/bathroom-furniture-shower-taps/169624.htm
Jess Asked :Hi there, Please could you confirm whether this model of bath comes with the handles depicted in some of the images? We don't want the handles. https://www.qssupplies.co.uk/bathroom-furniture-shower-taps/1123.htm Cheers, Jess
Yes, We confirm that the bath do not have handles.
Richard Asked :Can you supply the bath drilled for the handles? I would not want to run the risk of ruining the bath by drilling the holes myself.
Select option OP-29872, which means, the bath will come with pre-drilled for tap hole and the grips.
3
0
We will soon verify the details and add your rating appropriately.
0
Added to Cart
Clearance Sale 
Brands 
Sign In / Join
