Rangemaster Aquatrend Single Lever Kitchen Mixer Tap

Rangemaster Aquatrend TRE1SLCM/ Details

The Rangemaster Aquatrend Single Lever Kitchen Sink Mixer Tap offers a contemporary look in a stunning chrome, brushed, matt black or brushed brass finish that will look gorgeous in any kitchen its installed in. Made from stainless steel for durability and with several impressive features that stand out, this product is just what your kitchen needs to be as efficient and functional as possible. Complete with a smoothly swivelling spout as well as an anti-splash honeycomb aerator, this unit is controlled by a single, slim handle allowing for precise flow and temperature selection.

Deck mounted installation.
Contemporary design.
Overall height is 390mm [39cm].
Spout exit reach is 216mm [21.6cm].
Base to spout is 264mm [26.4cm].
Suitable for all pressure water systems.
The minimum water pressure recommended for smooth working is 0.4 bar [LP-Low Pressure], and the maximum is 5.5 bar.
Tap is suitable for all water pressure.
A flow rate of 13.75 Litre/min at 3 bar water pressure.
The spout can be rotated at a range of 360 degrees.

Single lever handle type.
Half-turn handle control.
Single flow type.
Includes tails.
1/2 stainless flexible hose inlet pipes.
Recommended hot water temperature of 46 degrees Celsius, and the maximum hot water temperature can be 70 degrees Celsius.
Images shown are only for illustration purposes.
Refer to the technical image for more technical information.
Download the Installation and Aftercare Instruction PDF from the Additional Info Section.

Info / Size (mm)

Tap
Pipe Centre: 216 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Aquatrend
⤷ Water Activation
: By Rotating
⤷ Handle Position
: Front
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Country of Origin
: UK
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Stainless Steel
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1
⤷ Spout type
: Swivel
⤷ Valve/Cartridge Type
: Ceramic Disc Cartridge

⤷ Handle Material
: Stainless Steel
⤷ Base To Spout
: 264
⤷ Spout Reach
: 216
⤷ Overall Height
: 390
⤷ Minimum Operating Pressure (Bar)
: 0.4
⤷ Handle Style
: Stick
⤷ WRAS Approved
: Yes
⤷ Spout Flow
: Single
⤷ Flow Regulator Included
: Yes
⤷ Barcode
: 5015834047799
⤷ Product Type
: Kitchen Mixer Tap
⤷ Tails
: Yes

Additional Info & Downloads

Download the Installation and Aftercare Instruction Pdf File Download the Product Data Sheet Pdf File

Total: £181.18 5 Working Days Approx QS Supplies

8 Features Included In This Product Explained

All Pressure Taps

All Pressure taps are compatible for use with all plumbing systems, including low-pressure hot water tanks. These taps can be identified with the 'A' symbol.

Anti-Splash Spout

The spout comes with a honeycomb aerator that mixes air with water and gives a bubbly ‘champagne-like’ water flow, reducing splashes.

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.

Swivel-Spout

The respective apparatus is engineered with the ability to move sideways or at certain angles, which helps them cover a greater area than would be possible in a stationary position.

Stainless Steel Material

Stainless Steel is an iron alloy with anti-rust and anti-corrosive properties, unlike iron. It contains a minimum of 10.5% of chromium and less than 1.2% of carbon and other metal alloys. Its corrosion resistance and mechanical properties can be improved by adding nickel, molybdenum, titanium, niobium, or manganese. This robust, hygienic, hard-wearing base material is popular in the construction of steel products.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Single Lever Taps

These taps are designed with a single lever or handle to control the water's temperature and flow. Extremely easy to operate, these also allow you to preset the water temperature by leaving it in the position with your preferred water temperature. Besides, it is simple to control the flow of water; the higher you lift the lever or move it to the end, the stronger the water flow.

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Nicola Asked :
What size hole do I need to drill in my worktop to fit this tap, please?

Answered By QS Team

The tap hole size is Ø35mm. For more details on installation, please refer to the Additional Info section and download the installation instructions or click here.