1810 Company Spruzzo Cold Rinse Hand Spray

1810 Spruzzo SPR/01/CH Details

The 1810 Company Spruzzo Cold Rinse Hand Spray is a durable hand spray fixture that is made with a striking metallic finish. This finish offers the device a clean and modern look that is only furthered by its simplistic shape. This deck-mounted unit comes with a neoperl aerator as well as 3/8 inch flexible tails to make it simple to install. The base diameter of this fixture measures 50 millimetres and the height measures 131 millimetres. It comes with a pressure regulating valve and only needs a minimum water pressure of 0.5 bar to run.

Deck-mounted installation.
It comes with a Neoperl aerator and 3/8-inch flexible tails.
The minimum water pressure required is 0.5 bar.
Recommended operating pressure is 1 bar.

Base diameter: Ø50mm (Ø5cm).
Height: 131mm (13.1cm).
The manufacturing code of this product is SPR/01/CH.
Refer to the technical diagram for more technical details.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Pressing
⤷ Tap Body Shape
: Round
⤷ Range
: Spruzzo
⤷ Handle Position
: Upwards
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5 years
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1

⤷ Overall Height
: 131
⤷ Width
: 50
⤷ Minimum Operating Pressure (Bar)
: 0.5
⤷ Handle Style
: Lever
⤷ WRAS Approved
: Yes
⤷ Compliance/Approvals/Standard
: WRAS
⤷ Barcode
: 5057199424532
⤷ Product Type
: Pull Out Kitchen Tap

Total: £152.96 3 Working Days Approx QS Supplies

3 Features Included In This Product Explained

Neoperl Aerator

Neoperl aerators are components that perform some critical functions in taps and showers. They control the flow stream's straightness and diameter while reducing splashing by adding air to the stream. This effectively saves water and, thereby, water bills. It is compliant with local plumbing codes and standards.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Medium Water Pressure

Water systems operating at a pressure between 0.5 and 0.9 bar are considered medium pressure. Products usually come labelled if they are suitable for use in medium pressure.