Deva Sensor 113mm High Chrome Mono Basin Tap

Deva Automatic SENSOR2/D Details

Ideal for dispensing cold or premixed water, the Electronic Sensor Tap is designed for public washrooms. The dainty and exquisite looking Mixer Tap will add a touch of class not only to the basin but the entire surroundings. This sparkling product comes with sturdy brass construction and incorporates the latest highly reliable electro valve that is activated via hand movement. The moisture and water-resistant control unit works with the mains supply or using batteries. Suitable for high pressure water systems, the tap comes with WRAS Approval.

The manufacturing code of this product is SENSOR2/D.
Perfect for public washrooms.
Choice of battery or mains power.
Battery operation requires 4 x AA batteries.
Recommended for use with a blending valve.
It comes in a chrome finish.
Valve /cartridge type: electro valve.

Height: 113mm.
Centre of the inlet to centre of outlet: 100mm.
Base to spout: 69mm.
Inlet connections: 1/2 inch BSP.
Working pressure: 0.5 - 5.0 bar.
Suitable for high-pressure water systems.
Refer to the technical diagram for the complete technical dimension.

Info / Size (mm)

Tap
Pipe Centre: 100 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: Motion Sensor
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 2 Years
⤷ Material
: Brass
⤷ Installation Type
: Deck Mounted
⤷ Valve/Cartridge Type
: Electro Valve
⤷ Base To Spout
: 69

⤷ Spout Reach
: 100
⤷ Inlet Connections
: G 1/2 Inch
⤷ Minimum Operating Pressure (Bar)
: 0.5 Bar
⤷ Power Source
: Battery
⤷ Sensor Type
: Infra-Red
⤷ Compliance/Approvals/Standard
: WRAS
⤷ Barcode
: 5057199057082
⤷ Product Type
: Sensor Tap

Total: £286.03 2 Working Days Approx QS Supplies

2 Features Included In This Product Explained

Mains-Operated

Mains-operated devices work on electricity by plugging into electrical wall sockets. These require higher electrical energy and can't be operated using batteries as small batteries can't power the device. Large, non-portable electrical appliances are typically mains operated.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Questions & Answers

Submit Your Questions 2 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Donald Asked :
Deva Automatic Sensor Tap 2-D - SENSOR2-D Can the above tap be supplied from the mains rather than battery operated, i.e. low voltage transformer? If so is there any retro kits than can be supplied for these taps?

Answered By QS Team

The sensor2/d is mainly operated with battery backup. Although it can be operated by battery only, we would not advise this in a high traffic area. The tap comes supplied with the necessary power pack for mains use.

Was this answer helpful?

Mr Asked :
Hi, We had 8 of the above tap units installed in 2011, 4 in the infant boys, 4 in the infant girls w/c's. There are currently 4 units not operating due to sensor failure. Do you happen to supply the sensors?

Answered By QS Team

We do not sell spares; therefore, we would ask you to contact the manufacturer Deva for replacement sensor.

Was this answer helpful?