Croydex Premier U-Shaped Chrome Shower Curtain Rod

stuart Asked :

Are the curtain rings able to pass by the 2 ceiling supports?

Answered By QS Team

Yes, the curtain rings are designed to be slightly bigger to bypass the ceiling supports.

Was this answer helpful?

1 0

Colin Asked :

I would need to reduce (cut) both the length and the width dimensions. Will the product still be usable?

Answered By QS Team

Due to the style of this rod, you could cause an issue, so unfortunately, we do not recommend cutting this down.

Was this answer helpful?

Malcolm Asked :

Hi, Can the 2M rail length be reduced to suit as I noticed from the fitting instructions that the dimples have to align when fitting into the joiner, and obviously, if you were to reduce the length, say to 1.3M, you would effectively lose the dimple, on one end?

Answered By QS Team

You can cut down this rail to size. Please have a look at the Installation Instructions PDF in the Additional Info section of the product or click here.

Was this answer helpful?

1 0

kaush Asked :

Can you please confirm the number of robs supplied with "Croydex C shaped to wall rob curtain railing and ceiling support" QS-V28278 MFC code AD149341? I wish to install this in a bath of size 700 mm by 1700 mm. I assume the following number of rods supplied: one-off 2000mm, two-off 1000mm and a ceiling rob off 500mm. Thank you.

Answered By QS Team

You are correct; each length of the rod is supplied as a separate piece. You will receive 1000mm x 2, 2000mm x 1 500mm x 2 ceiling supports.

Was this answer helpful?

2 0

Bhavick Asked :

Hi, I have a question about the ceiling support rod, in the questions asked previously you mention that the product now comes with 2 supporting structures for the ceiling, but the picture only shows one in the middle? Can you confirm that you do indeed get 2 ceiling support rods for near the bends? Can the curtains and the rings pass this fitting or will you need 3 different curtain pieces? Thank you

Answered By QS Team

We can confirm that this product is supplied with two ceiling supports. These are to be fitted, as shown in the above image. The curtain rings supplied have a slightly larger than normal opening, meaning they can pass the ceiling supports.

Was this answer helpful?

Allan Asked :

What tools do you need to fit this shower rail?

Answered By Croydex Hi, A drill with a suitable drill bit and screwdriver will be enough to fit this shower rail. Thanks

Was this answer helpful?

Emine Asked :

Hello, Would it be possible to attach the ceiling support at the bend and buy a matching one for the other side? I do, do you have a matching one you sell separately? Thank you

Answered By Croydex Hi, The product has now changed and includes two ceiling supports which are mounted close to the bends. Thanks

Was this answer helpful?