Ideal Standard Concept 1700 x 750mm White Idealform Plus Double Ended Bath

Ideal Standard Concept E860401 Details

Give your bathing sessions a delightfully refreshing twist by adorning your bathroom with this Ideal Standard Concept Idealform Plus Double Ended Bath. Produced to the highest standards from high quality Idealform Plus+ for increased strength and rigidity, this unit will excellently serve you without complaint over many years. This unit is finished in pristine white for imparting a bright appeal to your bathroom. It features an ergonomic backrest for total comfort. The generous water holding capacity will enable you to enjoy a leisurely soak.

The manufacturing code is E860401.
It comes in a white finish.
Size [mm]: 1695mm x 745mm x 370mm [Length x Width x Depth].
Size [cm]: 169.5cm x 74.5cm x 37cm [Length x Width x Depth].
Overall height is 540mm [54cm] [floor to rim].
Capacity: 200 litres to overflow.
Weight: 22.50 kg.
No tap holes.
Specification of Idealform Plus+ baths:.

Vacuum-formed acrylic for a luxuriously glossy finish.
These baths have double reinforcement for superior strength and exceptional insulation.
They feature a strong frame, leg set and baseboard for extra rigidity.
Designed by Robin Levien, RDI.
Frequently used in hotels, student accommodation and residential applications.
For complete size, details refer to the technical drawing.
Idealform Plus+ - [See Features Explained Section].
Optional Products: Panels.
Waste and overflow shown in the image are not included - sold separately.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Position of Drain
: Centered Waste
⤷ Range
: Concept
⤷ Bath Type
: Double-Ended
⤷ External Length
: 1695
⤷ External Width
: 745
⤷ Tub Depth
: 370
⤷ Height Including Feet or Panel
: 500 to 540
⤷ Front Panel Included
: Sold Separately
⤷ End Panel Included
: Sold Separately
⤷ Colour
: White
⤷ Grips Included
: No
⤷ Internal Bottom Length
: 872
⤷ Internal Bottom Width
: 329
⤷ Internal Top Width
: 522
⤷ Height of Rim
: 30
⤷ Distance Tub edge to centre of drain hole
: 340, 405

⤷ Distance Top edge to centre of overflow hole
: 70
⤷ Diameter of overflow hole
: 44
⤷ Diameter of Drain hole
: 53
⤷ Rim Width
: 110 45
⤷ Weight in kg
: 22.5
⤷ Slip Resistant
: No
⤷ Shape
: Rectangular
⤷ Capacity in litres
: 200
⤷ Country of Origin
: EU
⤷ Warranty/Guarantee
: 25 Years
⤷ Material
: Idealform Plus
⤷ No. of Bathers
: 2
⤷ Theme
: Modern
⤷ Waste Included
: Sold Separately
⤷ Barcode
: 8014140485605

Customise Your Product

Front Panel

The front panel is supplied with a 1700mm size, and it can be cut to size. Please Note: Image is for Illustration Purpose Only.

No Option Selected
OP-30913 - Unilux Plus+ Front Panel 1700mm - E479701 + £119.15

End Panel

Standard End Panel. Sturdy and Durable. Please Note: The image is for illustration purposes only.

No Option Selected
OP-42250 - Unilux Plus 750mm End Panel - E483201 + £62.95

Total: £644.94 5 Working Days Approx QS Supplies

2 Features Included In This Product Explained

With / Without Overflow

An overflow is a small hole or opening at the upper part of a sink, basin, bidet or tub that drains away water upon reaching its level so that no water is spilt. When a basin or bath does not come with this design feature, it is called “without overflow” and will need a compatible drain.

Idealform Plus+

Idealform Plus+ provides all the benefits of Idealform, plus with extra reinforcement for peace of mind. Four different layers combine to give these baths exceptional strength and rigidity. The outer shell is vacuumed-formed acrylic which is smooth to the touch and luxuriously glossy, easy to clean and resistant to wear and tear. It is then reinforced with Glass Reinforced Polymer and supported by an 18mm encapsulated baseboard to increase its strength. Finally, the whole bath is coated in an outer colour layer of a Glass Reinforced Polymer resin mix, which creates a more robust bonded product with a smoother surface and added insulating properties to keep the water warmer for longer.