Bristan Commercial Tall Body Chrome Basin Pillar Soft Touch Timed Flow Tap

Technical drawing QS-V102500 / Z2 TBV 1/2 C

£107.15

STOCK AVAILABILITY

2 Working Days Approx

No Rating

Shipping: £7.95

Key Features

✔Manufactured using high-quality brass material
✔Soft-touch easy to use the mechanism
✔Supplied with 5L/min flow regulator
✔Features WRAS approved
✔One year of guarantee against any manufacturing defects.

QTY

SKU Code: QS-V102500

Bristan Commercial Z2 TBV 1/2 C Details

Bristan Commercial Tall Body Basin Pillar Soft Touch Timed Flow Tap is manufactured using high quality brass material and has been given a chrome finish. It has a height of 250mm and Base to spout measure of 190mm working with a soft touch easy to use mechanism. Supplied with 5L/min flow regulator, it is WRAS approved and backed with 1year of guarantee against any manufacturing defects.

Manufacturing code of this product - Z2 TBV 1/2 C.
It comes in a chrome finish.
Height: 250mm - (25cm).
Base to spout: 190mm - (19cm).
Centre of the inlet to centre of outlet: 135mm - (13.5cm).
Valve/cartridge type: Self closing valve.
Timed shut off to meet BS EN 816.
A tall body is ideal for vessel basins or troughs.

A pressure-reducing valve must be fitted if the supply pressure exceeds 3 bar pressure.
Supplied with 5L/min flow regulator.
Maximum hot water temperature: 60°C.
Suitable for low water pressure.
Required minimum 0.2 bar water pressure.
Refer to the technical diagram for the complete technical dimension.
Download the product data-sheet and installation instructions PDF from the Additional Info section.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 1 Year
⤷ Material
: Brass
⤷ Theme
: Modern
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 1

⤷ Base To Spout
: 190
⤷ Overall Height
: 250
⤷ Minimum Operating Pressure (Bar)
: 0.2
⤷ Handle Style
: Knob
⤷ WRAS Approved
: Yes

Additional Info & Downloads

Download the Product Data Sheet Pdf File Download the Installation Instructions Pdf File

Total: £107.15 2 Working Days Approx QS Supplies

1 Features Included In This Product Explained

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

You've Selected which adds to a total of

Reviews & Ratings

Rate this Item.:

Questions & Answers

Submit Your Questions 2 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Adam Asked :
I purchased this product recently from your website. I have tried fitting it, and I can't get a connection onto the flexi tail; it won't screw into place. Am I using the correct connection?

Answered By QS Team

This tap needs to be installed with a 1/2-Inch female BSP connector.

Was this answer helpful?

Nina Asked :
On the Bristan Commercial Tall Body Chrome Basin Pillar Soft Touch Timed Flow Tap. How long does it take until the tap automatically stops running? Approximately how much water comes out when pressed once?

Answered By QS Team

The Z2 TBV 1/2 C is supplied with a 5 litres per minute flow regulator. This tap will run for approximately 15 + 5 seconds, depending on the water pressure going to the tap. The amount of water per press will be dependent on the bar pressures from the system feeding the tap. We have attached a copy of the fitting instructions and the datasheet, which has the specifications and the flow rates for the tap.

Was this answer helpful?

Bristan Commercial Range Of Products