You May Also Require
REVIEWS & RATINGS
Rate this Item.:
Peter Kesgrave Date: September 14, 2015
1200x750 Low level Shower Tray and Drain.
The shower tray has been installed (by Me) for over 18 months now and is fine. It is was heavy so is really a two man job to install the tray but once set up with the outer edges level it drains well to the outlet. I thought it would be slippery but short of having soap all over the tray is seems to be slip resistant. The outlet fittings came with it and work well with-in the limitations of being low level. I was a bit surprised to see there were no ribs on the standing area but this makes it easier to wipe down and along with the above comments ref slipping are not needed. Pleased with purchased.
Helpful?
OVERALL RATING 5 Stars
- Quality:
- Value For Money:
- Style:
Chris Cranbrook Date: December 11, 2017
OK - But installation kit could be better
The shower tray is of a high quality. My issue is with the installation kit I purchased. Its adjustable supports work well giving a high degree of control, the problem is that if you are more than 2 meters from the main waste/soil pipe you can't get sufficient fall on the shower waste pipe to be legal. You can overcome this by standing the shower on a packing board, problem is then that the cowling for the base of the shower are too small. On the whole the installation kit is a waste of money if you are more than 2m from the main waste.
Helpful?
OVERALL RATING 4 Stars
- Quality:
- Value For Money:
- Style:
Eva Welwyn Date: July 18, 2017
Mixed experience
We have ordered a number of items for our two bathrooms we were renovating. Everything we have ordered came in a few days. The negative side was that the delivery company was unable to confirm the time of the delivery. We did have problems with shower trays though. They were not straight and they needed to be replaced. I was not allowed to return a shower tray and buy one somewhere else, if I did, would have to pay for returns myself - £69 was the cheapest. In the end all got sorted and we're very happy with the end result.
Helpful?
OVERALL RATING 4 Stars
- Quality:
- Value For Money:
- Style:
Ben CREWKERNE Date: July 10, 2019
Product good - QS Supplies support not so
I bought this tray and specifically ordered a white trap cover to match the colour of the tray. I even got the product code for this off Just Trays and called QS Supplies to give them the code because it wasn't possible to place the order online. A chrome trap cover arrived and I was disappointed the QS Supplies didn't honour my original verbal order. Not sure I'd order through QS again.
Helpful?
1 of 1 People have found this Review useful
OVERALL RATING 4 Stars
- Quality:
- Value For Money:
- Style:
Rose selborne Date: December 11, 2017
Sturdy thin attractive shower tray
This is a lovely thin shower tray ,easy to clean and visually more appealing that the usual heavier edged versions. Low lip means it is almost like stepping into a wet room shower,not climbing into a cubicle.
Helpful?
OVERALL RATING 5 Stars
- Quality:
- Value For Money:
- Style:
Questions & Answers
Submit Your Questions 5 Questions Asked
Have a question about this item? Ask our tech team. We aim to reply within 72 hours. If you want to know get answers fast, please call us on 0116 251 0051
james Asked :Hello, we want to buy the Just Trays JTFusion White Rectangular Flat Top Shower Tray With Waste, does it come with a white waste? Thanks, James
Answered By QS Team :
Yes, our Fusion trays are supplied with a waste. As standard, this waste has a Chrome top. However, you can specify at the time of order that you would like the white concealed waste. The top of this waste sits flush with the inside of the tray. To get this white waste, you need to order part number FCW90.
Peter Asked :Looking at item number QS-V77427 could you tell me if the 45mm height is to the top of the upstand or not including the upstand? Thank you
Answered By QS Team :
The height of the Fusion shower trays is 45mm. The integrated tiling upstand is 13mm high. During installation, this upstand is set into the plasterboard and tiled over. The framed enclosure is then installed inside the remaining upstands (on the open sides) to create a fully watertight installation. The frame on the enclosure will be higher than 13mm and will show above it, enabling the door to open.
Mark Asked :Hi, Tech, what is the trap seal depth supplied with the tray? 50mm seal required?
Answered By QS Team :
I am pleased to confirm that the 90mm waste supplied with our Fusion trays has a 50mm water seal. If I can be of any further assistance, please do not hesitate to contact me.
Jude Asked :I want the anti-slip version on this tray. Do you stock it, please?
Answered By QS Team :
All JT, anti-slip trays are manufactured to order, and their standard lead time is 7-10 working days. However, our, distributors do hold stock anti-slip trays, so the availability time specified above is almost correct.
ian Asked :Is this the anti-slip version?
Added to Cart