REVIEWS & RATINGS
Questions & Answers
Bernard Chew Asked :How is this mirror attached to a tiled bathroom wall? Hanging plates are mentioned in the answered questions: how are these plates attached to the mirror and how many of them? I am having to replace a mirror as it fell off the wall because the metal hanging plate became unstuck from a sticky pad on the rear of the mirror. The sticky pad is well stuck to the mirror but not the plate.
Answered By QS Team :
The mirror is supplied with two metal pre-bonded plates on the back of the mirror - 2 x black plastic pegs & 2 x buffer pads are supplied in the package. The black pegs screw onto the wall (using the relevant screws/rawl plugs needed for your type of wall) and these have a hook on the top of them which the metal brackets on the reverse of the mirror hook over. The buffer pads are used towards the bottom of the mirror to space the distance created at the top due to the thickness of the brackets. Overall dimensions: (h)70cm, (w)50cm, (d)5mm. (1cm with hanging plate). MOUNTING POINT: Rear view-3 x attached metal plates:2 x(7cm x 8cm), 1 x(12cm x 12cm). LANDSCAPE ORIENTATION-12.5cm down from the top of the mirror, 21cm in from the left hand edge of the mirror, 19cm in from the right hand edge of the mirror. Centre to centre-30cm. PORTRAIT ORIENTATION-17.5cm down from the top of the mirror, 14cm in from the left hand edge of the mirror, 16cm in from the right hand edge of the mirror. Centre to centre-20cm. Additional Information: Geometric brilliant cut design on rectangular bevelled mirror. 5mm bevel on mirror. Hanging plate causes mirror to stand 5mm away from wall. I hope that this helps
linda carson Asked :What kind of wall fitment does this mirror have, and does it hang flat on the wall?
Answered By HIB :
Our bevelled mirror has hanging plates an the back of the mirror and will have about a 5mm gap once hung.
ALLAN BROADHURST Asked :Could you please advise what a Demista pad does? How does it work?
Answered By QS Team :
The demister pad works similar to the rear car window not allowing the window to be misted. It needs to be connected to an electrical point for the heaters to work.