Order Hotline: 0116 251 0051 Call us today until 6pm

Tre Mercati Milan 2 Hole Basin Mixer Tap Black - 63395


MFC CODE: 63395


4 Working Days Approx

£161.05 RRP: £360.00

You Save £198.95 on RRP SHIPPING: FREE

Make your bathroom decor a one-of-its-kind, innovative creation by fitting your basin with the attractive and awe-inspiring 2 Hole Short Spout Basin Mixer Tap, brought to you by Tre Mercati from its Milan range. The matt black finished faucet, with a single-lever handle, is made from finest quality material. The wall mounted black beauty, suitable for high pressure water system, is easy to install and clean. The strong and durable tap is backed with a ten years guarantee from the manufacturer.

Tap With Extended Spout

  • Short spout basin mixer tap
  • Manufacturing code of this product is 63395
  • Also available with extended spout [See Option]
  • Made from high quality material
  • Projection from wall: 150mm
  • Dimension: 220mm x 100mm [Width x Height]
  • Works under minimum 0.5 bar water pressure
  • Single lever handle
  • Wall mounted
  • Conform to BS5412
  • Strong and durable
  • Easy to install and clean
  • Refer technical drawing for more specification from technical tab
  • 10 years guarantee from the manufacturer.


Please Note all the measurements are in 'mm'
Colour Black
Warranty/Guarantee 10 Years
Theme Modern
Installation Type Wall Mounted
No. of Holes Required 2
Width 220
Depth 150
Minimum Operating Pressure (Bar) 0.5
Handle Style Lever
WRAS Approved No
Waste Included No

INFO / SIZE (mm)

  • Tap
  • Pipe Centre: 150

Sizes Available
Other Sizes / Finishes / Variations Available.
QS Code Finish Size / Difference MFC Code
QS-V31270 Chrome - 63095

Total: £161.05 4 Working Days Approx QS Supplies

You've Selected which adds to a total of


Rate this Item.:

Questions & Answers

  Submit Your Questions 8 Questions Asked

Have a question about this item? Ask our tech team. We aim to reply within 72 hours. If you want to know get answers fast, please call us on 0116 251 0051

Can you please advise what is the dimension (width) from the centre of the spout circle to the lever circle? Thanks

Answered By QS Team :
Roughly 120mm from centre to centre.

Was this answer helpful? Yes - No

Hi What is the depth required behind the face plate for pipework and fittings? Do you have any installation instructions? Thanks Martin

Answered By QS Team :
The minimum depth would be 50mm and the maximum would 70 mm.

Was this answer helpful? Yes - No

Is't possible to do a special order from canada ? What size of pipe i need

Answered By QS Team :
We can't ship to Canada, but if you can arrange a courier yourself, we can then ship it to the courier company. We believe that these are ½ pipework.

Was this answer helpful? Yes - No

Could I please have the instruction manual sent to me for the following product in order to assemble the pieces - Tre Mercati Milan - 63390 Thank you

Answered By QS Team :
Please refer this URL : (https://images.alt.qssupplies.co.uk/2017-8-8--12-29-17-845.pdf) for the Milan, this is down as a 63090 - this is the same tap but in chrome. The unit does not contain an install guide per se as the valve is set into the wall similar to a shower and the rest is all connected up to the hot, cold and then the spout feed.

Was this answer helpful? Yes - No

I am wanting to use this wall mounted tap with a Dune round bowl measuring 365mm diameter. The vanity until which the bowl will be on is approx 400mm deep and 800mm wide. Which wall mounted tap should I use? The 200mm spout or the 150mm? Your advice would be appreciated. Many thanks, V Ball

Answered By QS Team :
You could use either of the two basin taps, it depends on how far you would like the spout to come across the bowl. We would suggest giving the measurements to your installer who could advise on how it would look and work.

Was this answer helpful? Yes - No

The technical drawing shows the mercati Milan 2 hose spout basin mixer tap - 63395 the control at the right-hand side and the spout at left, but all photos show spout always at left. Is the item available as spout at left? I am an architect and looking for a tap for my home renovation. Do you offer designer discounts on personal orders? Kind regards Susanna

Answered By QS Team :
Hi Susanna, Thank you for your query. The spout is reversible and therefore you could have the spout either on the left or right. However, it is easy to plumb in as the picture shown. Hope this helps.

Was this answer helpful? Yes - No

1   0

Hi I'm interested in this tap but would like to see an installation drawing Kind regards/ jenny andersson

Answered By QS Team :
Hi Jenny, Thank you for your query. The information we hold on the tap is on our website, in terms of the size and dimension. The installation of the tap is standard and could be carried out by any qualified plumber. Is there any specific information that you are looking for? Please email our support team in support@qssupplies.co.uk in regards to this.

Was this answer helpful? Yes - No

is the Tre Mercati - 63395 WRAS approved??

Answered By Tre Mercati :
This is not Wras approved

Answered by the verified manufacturer/supplier Was this answer helpful? Yes - No

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.