Order Hotline: 0116 251 0051 Call us today until 6pm

Finishes Available
QS-V53304 small Image 1
QS-V53304 small Image 2
QS-V53304 small Image 3

Heritage Ryde Pair Of Bath Pillar Taps




RRP: £75.00 You Save £20.75 on RRP


3 Working Days Approx

Shipping: £5.95


This lovely set of taps is proudly brought to you by Heritage Bathrooms. The Ryde Bath Pillar Taps display elegant design lines and glossy chrome finish. Available from QS Supplies at a most competitive rate.

+  Read what's included.. & options available

Download the Fitting Instructions Pdf File

Please Note all the measurements are in 'mm'
Colour Chrome
Warranty/Guarantee 5 Years
Material Brass
Theme Traditional
Installation Type Deck Mounted
No. of Holes Required 2
Valve Included Yes
Valve Type Standard
Base To Spout 44
Spout Reach 93
Overall Height 114
Width 70
Depth 128
Max. Deck Thickness 26
Inlet Connections 3/4"
Minimum Operating Pressure (Bar) 0.1
Handle Style Crosshead
WRAS Approved No
Finishes Available
Add-on Selected: OP-128379 - Chrome - TRHC01 + £0.00

INFO / SIZE (mm)

  • Tap
  • Pipe Centre: 93


  • Available in 2 finish [Optional]
  • Full Height: 114mm
  • Spout Projection: 93mm
  • Inbuilt standard compression valve
  • Minimum water pressure recommended for smooth working is 0.1 bar [LP-Low Pressure]
  • Crafted from top quality solid brass
  • Valve Type: 3/4” standard valve
  • Inlet Connections: G 3/4” BSP
  • Suitable for all plumbing systems
  • For complete size details please refer technical drawing
  • 5 years of guarantee from Heritage against any manufacturing defects
  • Download installation instructions manual PDF from technical tab
  • Available finishes with manufacturing code:
  • Chrome - TRHC01
  • Gold - TRHG01.

Total: £54.25 3 Working Days Approx QS Supplies

You've Selected which adds to a total of


Here's what people are saying about this item.

Rate this Item.:

Hide All Reviews

Towcester Date: August 30, 2015

Damaged on arrival
Unfortunately the cold index was shattered on arrival. In fairness, the company sent out a new set of taps. The cold index to the matching sink taps came off within 2 weeks and had to be re-glued on. We also ordered an Ultra Bridge Tap for the kitchen at the same time, which was to be fitted after the bathroom was completed. As we were going away the following day and not carrying out the fitting ourselves, we omitted to check it. When we did, after the company's 14 day stipulation, we found that this tap was also faulty with a large dent in the tap spout. The company refuse to send a new part.
2 Star

Helpful? Hands Up Hands Down


  • Quality: 1 Stars
  • Value For Money: 1 Stars
  • Style: 5 Stars

RYE Date: September 14, 2016

Chrome bath taps
After lots of research and internet searching I purchased a pair of Heritage Ryde taps. The quality is really good and they FEEL lovely when you touch them! I wanted my bathroom to look traditional but not too dated and out of place and this style suits the room perfectly. QS Supplies were selling them at a good price compared with other sites. Very pleased with my purchase and the service received.
5 Star

Helpful? Hands Up Hands Down


  • Quality: 5 Stars
  • Value For Money: 5 Stars
  • Style: 5 Stars

Questions & Answers

  Submit Your Questions 1 Questions Asked

Have a question about this item? Ask our tech team. We aim to reply within 72 hours. If you want to know get answers fast, please call us on 0116 251 0051

For this Heritage Ryde tap, Please can you send me the taps dimensions sheet for both basin and bath taps - it is on screen but to small to read Is the Ryde a washer tap and not ceramic disc? Is the spout outlet completely open - ie not restricted with a "spray" just inside the spout Is the spout outlet broadly elliptical ie. not fanned out at the sides at end (some types of traditional fan out) Why is it not WRAS - what benefit would a wras tap give Thanks

Answered By QS Team :
Dimensions of Bath Taps: https://assets-large.qssupplies.co.uk/QS-V53304_2_lg.jpg Dimension of Basin Taps https://assets-large.qssupplies.co.uk/QS-V53300_2_lg.jpg 1) Fitted with standard compression valve 2) The spout is open and there is no anti splash in them 3) Oultet is just round/eliptical Hope this Helps

Was this answer helpful? Yes - No

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.