You May Also Require
REVIEWS & RATINGS
Rate this Item.:
Questions & Answers
Submit Your Questions 3 Questions Asked
Have a question about this item? Ask our tech team. We aim to reply within 72 hours. If you want to know get answers fast, please call us on 0116 251 0051
George Asked :What is the depth of the overhang at the front. My cupboard front has been cut out already for the basin I'm replacing and I need to ensure this basin will cover it. Is the 170mm in the diagram the depth to the waste or to the bottom of the basin overhang?
Answered By QS Team :
Please see the copy of the data sheet for this basin, You should find the size you are looking for on this.
Download Datasheet
Paul Asked :Is this basin also available with left-hand tap hole, please?
Answered By QS Team :
Unfortunately, this basin comes with 1 tap hole on right side. You can refer product codes: QS-V26802 or QS-V59698 for a basin with tap hole on the Left-hand side from S50 range.
stuart Asked :will the vitra s50 compact semi recessed basin fit into a 200mm deep worktop/unit?
Answered By Robert :
Measuring the one we have here it would fit in a 200mm worktop, this would mean the back of the basin would be level with the back of the worktop though. Basically 200mm is the measure from the back of the basin to the drop detail on the side, hope that helps.
Answered By Kevin :
The sink will fit in a 200mm unit as for the worktop there will be no worktop left as you will need to cut away 200mm to seat the sink and will be left with a little worktop either side. I made mine 225mm as I was tiling it.
Answered By Charles :
The basin was fitted into a 250mm deep worktop. 200mm would not be deep enough
Answered By kevin :
I have units that are 220mm deep. There is a 20 mm gap then between the back of sink and tiles. So yes it should fit
Added to Cart